Connect with us

Concrete

Building Durable Roads

Published

on

Shares

As India targets the construction of over 10,000 km of highways annually, the question of cost optimisation in road construction becomes increasingly critical. Let’s discover some effective ways to build durable roads without compromising on cost, quality, safety and sustainability.

Road construction plays a vital role in infrastructure development, serving as a catalyst for economic growth, improved regional connectivity and urban development. Since April 2014, India has constructed and upgraded nearly 101,900 km of National Highways (NH). The average annual rate of highway construction from 2014 to 2024 has surged by approximately 130 per cent compared to the 2004-2014 decade. Looking ahead, the Union Government has set a bold goal of building 10,000 km of highways in the 2025-26 fiscal year.
However, despite this rapid expansion, challenges such as budget overruns, project delays and environmental impacts continue to affect the efficiency and sustainability of road infrastructure projects. Achieving cost-efficiency in this sector requires a careful balance between maintaining quality, adhering to timelines and staying within budget, all while minimising environmental impact. Contributing factors to rising costs often include inadequate project planning, limited adoption of advanced technologies and poor resource management. Additionally, while striving to meet global quality standards is crucial, it must be done without compromising financial discipline.
Hence, there is a need to explore ways to reduce costs across the road construction lifecycle – starting from planning and design to material usage, execution, and long-term maintenance – without compromising on the quality or performance of infrastructure.

Early-stage planning: The hidden lever
According to RK Pandey, former Member (Projects), National Highways Authority of India (NHAI), cost overruns often originate during the planning phase. “Planning and pre-construction activities are the two foundations for successful completion of a project,” he emphasises. “Alignment selection, land acquisition and detailed project reports (DPRs) must be approached with cost, environmental and lifecycle considerations in mind.”
The shift from brownfield to greenfield alignments, as adopted under the Bharatmala programme, exemplifies this strategic mindset. While initial costs may be higher, greenfield projects offer shorter routes, reduced congestion and lower lifecycle maintenance costs. Similarly, elevated corridors, as opposed to constructing multiple bypasses, could be a long-term solution to land scarcity and urban sprawl.
Highlighting the importance of vertical alignment choices and the need to reassess standard practices such as paved shoulder design, Pandey says, “If paved shoulders are not subjected to the same level of traffic, why must they match the carriageway in design? These are areas where rethinking standards can lead to meaningful
cost savings.”
Many experts emphasise that cost optimisation must be approached not as cost-cutting, but as intelligent engineering. “There’s a fine line between reducing costs and compromising safety,” observes Dr V Ramachandra, Director, RASTA – Centre for Road Technology.” We need industry
and policy-level mechanisms to ensure innovations in materials and methods are implemented meaningfully.”
He points out that while the Indian Roads Congress (IRC) accredits new technologies and materials, implementation remains inconsistent. A structured framework for pilot projects, followed by feedback loops and refinement of standards, is essential. “For example, alternative aggregates have been approved but unless we monitor their field performance, the industry will remain cautious,” he adds.
Dr Ramachandra also suggests incorporation of lifecycle cost analysis in tender evaluations rather than relying solely on initial construction costs. “This shift would naturally promote the adoption of durable and sustainable methods over cheaper, short-term solutions,” he opines.

The role of independent quality audits
Ensuring quality through third-party quality audits is also essential for building durable roads. Explaining the value of such assessments, Dr Manoranjan Parida, Director, CSIR-Central Road Research Institute (CRRI), says, “Third-party audits are akin to safety assessments conducted for metro or railway projects before opening to the public. They ensure compliance and help identify construction lapses early.”
He advocates for concurrent audits, conducted during construction instead of post-completion, to enable timely interventions and reduce rework-related costs. “Early detection of defects leads to significant savings, while enhancing durability and safety of the finished road,” he underlines. In his view, this is particularly important in high-value projects involving multiple agencies, where accountability and coordination can sometimes fall through the cracks.

Private-sector perspective: Optimising under constraints
As a long-time champion of PPP models, Dr Sudhir Hoshing, Chief Mentor, IRB Infrastructure Developers, provides a candid assessment of how private contractors navigate optimisation under increasingly rigid specifications. “In early BOT projects, we had the freedom to design with a 20 to 30-year maintenance horizon in mind,”
he elaborates. “Now, most designs are fixed by the authority or DPR consultants, leaving little room for innovation.”
In such cases, material substitution becomes the key lever for cost optimisation. IRB has made significant strides in this direction, with extensive use of fly ash, ground granulated blast furnace slag (GGBS), steel slag and recycled materials. “We have invested in a recycling plant capable of processing 60-70 per cent RAP (recycled asphalt pavement),” shares Dr Hoshing. “That’s the kind of shift that matters.”
He insists that cost optimisation does not mean lowering quality. “A road that fails in two years is a financial disaster,” he points out. “True savings come from building durable assets using smarter processes and materials.”
The lack of flexibility in current procurement models, especially under EPC and HAM contracts, leaves little room for contractors to apply design innovations. “While PPP contracts should ideally follow output-based specifications, in India we often default to input-based design, which constrains innovation,” opines Devayan Dey, Partner, PwC India.
Dr Hoshing advocates granting of more design latitude to concessionaires, allowing them to apply value engineering techniques. “We’re often forced to include unnecessary components like roadside call boxes that are obsolete in the smartphone era,”he says. “This adds to costs without delivering value.”
Pandey concurs, suggesting that value engineering and cost optimisation should be mandatory components of DPR preparation. “Every project proposal should include a section justifying why a particular alignment, material or method was chosen over other alternatives,” he says.

Sustainable materials and the circular economy
With environmental awareness rising, there is a growing need to use industrial byproducts such as steel slag, red mud, copper slag and biochar in road construction. CRRI’s research has helped develop processing techniques and guidelines for these materials, which are now being trialled across India. Dr Parida cites the Ministry of Steel project co-developed with Tata Steel, JSW and AMNS that enabled steel slag to be used in trial stretches in Surat and Jamshedpur. “Once these materials are standardised under IRC codes, their use can be scaled nationally,” he explains.
Dr Ramachandra adds, “Bottom ash, a byproduct of thermal power plants, offers similar potential.
We generate about 35-40 million tonne annually and up to 50 per cent of it can be used in road layers. But we need guidelines and quality checks in place.” According to him, more composite cements and multi-blend mixes should be used in road construction, as they lower the carbon footprint while improving durability.
From environmental ratings to material recycling, many construction companies have taken steps in integrating ESG principles into construction. “In the past three years, IRB Infrastructure has gone from a sustainability rating of 0.7 to 52 – among the highest in the industry,” says Dr Hoshing.
Apart from material recycling, IRB has implemented water reuse systems in its hot-mix plants, installed emission control systems, and designed drainage infrastructure to store and recycle water onsite. “The use of glass fibre reinforcements and steel fibres is also emerging as an effective tool to reduce thickness and improve road performance,” he highlights.
Experts also feel that there is a need for continual revision of IRC and BIS codes to reflect field learnings.

Focus on right procurement and digitalisation strategies
Having the right procurement strategies is often considered the key for improving operational efficiency in road construction projects. Many firms have adopted centralised procurement for all major materials like steel and cement, which leads to bulk discounts and improved cash flow management. “There are also new models where vendors handle procurement and receive staggered payments from contractors, easing liquidity pressure,” elaborates Dr Hoshing. “Equipment rental models with manpower bundles also help reduce capital outlay.”

Dey suggests a three-pronged roadmap for cost optimisation in Indian road construction:

  • Design innovation: Empower private players with flexibility in design, remove rigid specifications and promote value engineering during project preparation.
  • Supply chain efficiency: Promote use of recycled and alternative materials, optimise procurement models and reduce dependency on scarce natural aggregates.
  • Technology adoption: Embrace digital tools in quality control, project tracking and asset management to boost speed, transparency and durability.

Experts agree that the next leap in optimisation would come from digital construction. Pandey predicts a move from mechanised to autonomous construction, reducing errors and improving speed.
AI-driven field inspection – where drone footage, photo annotations and speech-to-text interfaces help generate real-time progress reports – has the potential to cut down layers of bureaucracy and improve accountability. “Even requests for inspection and quality control tests can now be logged digitally,” says Dr Hoshing. “We are inching closer to real-time monitoring across the board.”
India stands at a pivotal moment in its infrastructure journey. If innovation, sustainability and engineering excellence are institutionalised across the public and private sectors, cost-effective yet world-class roads can indeed become a reality.

(This article is based on a virtual panel discussion hosted by FIRST Construction Council titled “Cost Optimisation in Road Construction” on May 16, 2025. The discussion was organised in association with CONSTRUCTION WORLD, Infrastructure Today and Equipment India magazines.)

Concrete

NCL Industries Approves Rs. 5.95 bn Solar-Wind Investment

NCL Industries also receives preliminary approval for an Odisha cement plant.

Published

on

By

Shares

NCL Industries has approved an investment of Rs. 5.95 bn for Phase 2 and Phase 3 of its 130 MW solar and wind power project in Tuticorin, Tamil Nadu. The approval covers the remaining 80 MW capacity and takes the estimated cost of the entire project to Rs. 9.87 bn.

The company, which manufactures cement, ready-mix concrete and other building materials, had approved the first phase on April 13, 2026. Phase 1 consists of 50 MW and was estimated to cost Rs. 3.92 bn. The project will be financed through a combination of debt and internal accruals.

Separately, the company’s board has granted in-principle approval to pursue a proposal for establishing a cement manufacturing plant in Odisha. NCL Industries plans to approach the Odisha government for project land and will undertake the applications and approvals required for the proposed facility.

The company said the Odisha project remains at a preliminary stage. No land allotment or definitive agreement has been executed, and it has not made any binding commitment to acquire or lease land as of the date of its disclosure.

Further action on the proposed cement plant will depend on applicable regulatory approvals, as well as the company’s additional evaluation and internal approvals. The board’s decision does not therefore represent a final investment commitment for the Odisha facility.

Shares of NCL Industries closed at Rs. 170.40 on the BSE on November 13, 2026, down Rs. 1.85, or 1.07 per cent, from the previous close. The company’s renewable energy expansion is intended to support its power requirements, while the Odisha proposal would add a new manufacturing project to its cement business if approved at a later stage.

Continue Reading

Concrete

Cement Makers See Margin Relief as Oil Prices Lower Fuel Costs

Lower fuel costs and higher prices are set to support cement earnings.

Published

on

By

Shares

Cement makers are set to see a significant improvement in profitability in the second half of FY27 as falling global oil prices reduce the cost of key fuels, including petcoke and coal. Higher cement prices are also expected to support earnings, according to a report by Systematix Group.

The cement sector remained resilient in Q2 FY27, with volumes across the companies covered by the brokerage rising 7.2 per cent year-on-year. Higher sales volumes and improved realisations contributed to top-line growth during the quarter, although fuel and packaging expenses remained near-term concerns for manufacturers.

The report said the impact of lower oil prices should gradually appear in fuel costs, though the transmission is likely to be delayed. Petcoke and coal prices generally follow movements in crude oil prices, and the recent decline in global oil prices is expected to provide relief in subsequent quarters rather than immediately.

Cement prices improved towards the end of the second quarter, while price increases implemented during September and October are expected to support realisations in H2 FY27. The combination of stronger selling prices and moderation in energy costs could help offset pressure from fuel and packaging expenses, particularly after the third quarter.

Demand conditions are expected to remain supportive, with infrastructure spending, housing demand and a recovery in construction activity after the monsoon set to drive consumption in the coming months. Demand in eastern markets remained subdued because of prolonged monsoon conditions and flooding, while northern, southern and western markets recorded stronger activity.

The report retained a positive view of the sector, citing resilient demand growth of 8 to 9 per cent, improving pricing discipline and the expected moderation in fuel costs. These factors are expected to support a sharp earnings recovery for cement companies during H2 FY27.

Continue Reading

Concrete

ABB Extends Drive Lifespan at ACC Cement Plant Without Production Shutdown

Published

on

By

Shares

ABB reconditions 25 drives at ACC’s Jamul cement plant, avoiding 16 tonnes of CO₂ emissions while improving reliability through predictive maintenance.
Chhattisgarh

ABB has signed a multi-year Motion OneCare service agreement with ACC Limited, part of the Adani Group, to modernise ageing industrial drives at its Jamul cement plant in Chhattisgarh, improving operational reliability while avoiding approximately 16 tonnes of carbon dioxide (CO₂) emissions without disrupting production.

Announced on 27 October 2026, the agreement combines scheduled drive reconditioning, digital condition monitoring and energy appraisals to extend equipment lifespan, improve plant uptime and optimise maintenance costs. The initiative marks a shift from conventional equipment replacement towards a more resource-efficient approach to industrial asset management.

The first phase, completed in April 2026, involved the on-site reconditioning of 25 ABB ACS800 variable speed drives without a major plant shutdown. By retaining the existing cabinets and restoring the drive modules rather than replacing entire panels, ABB helped ACC preserve capital investment, minimise material consumption and avoid approximately 16 tonnes of CO₂ emissions.

A second phase, covering an additional 25 ACS800 drive modules, is scheduled for the fourth quarter of 2026. The programme is designed to improve long-term equipment reliability while allowing maintenance activities to be aligned with the plant’s operational schedules.

The ACS800 drives, installed at Jamul in 2010, had delivered more than a decade of near-continuous service in demanding cement manufacturing conditions. However, ageing electrical components and changing fault patterns had begun to affect their ability to meet the plant’s reliability requirements.

Rather than opting for complete equipment replacement, ACC engaged ABB’s certified engineers to conduct a comprehensive asset health assessment. The evaluation found that the existing cabinets and enclosures remained structurally sound, making targeted reconditioning a technically viable and cost-effective alternative to full replacement.

Drawing on nearly two decades of experience with ACC’s equipment and operating requirements, ABB developed a maintenance framework tailored to the plant’s shutdown windows, budget cycles and production priorities.

The Motion OneCare agreement incorporates planned equipment restoration, condition-based monitoring and energy assessments, enabling ACC to adopt a more systematic approach to maintaining critical electrical infrastructure.

As part of the programme, ACC has implemented ABB Ability™ Digital Powertrain Insights to monitor drive performance and identify emerging operational issues before they result in equipment failures.

The digital platform provides continuous visibility into parameters such as temperature, current, vibration and fault patterns. These insights allow maintenance teams to detect early signs of equipment deterioration, schedule interventions more effectively and reduce the likelihood of unexpected downtime.

Amit Gupta, Local Division Manager, Motion Services, ABB India, said: “We know what unchecked wear costs over time: a small inefficiency that eats away at ROI for years. At Jamul, the evidence pointed clearly to assets with productive life still in them.”

“Our job was to restore them properly and give the team the tools to stay ahead of the next problem. At ABB, we don’t just fix what fails. We want to protect what works.”

The initiative also demonstrates the growing relevance of circular economy principles in cement manufacturing, where extending the service life of existing industrial equipment can reduce capital expenditure, material consumption and the environmental impact associated with manufacturing replacement components.

According to ABB, drive reconditioning can reduce lifecycle emissions by 50 to 80 per cent compared with complete equipment replacement. By preserving functional components and restoring critical modules, the process helps retain the economic and material value of existing industrial assets.

The addition of energy appraisals in subsequent phases will further expand the programme beyond equipment restoration, enabling ACC to assess drive performance, identify energy-saving opportunities and improve operating efficiency.

For cement manufacturers, variable speed drives play an important role in controlling motors and optimising energy consumption across production processes. Maintaining their reliability and efficiency is essential for minimising operational disruptions and managing electricity costs.

Vinod Bahety, CEO – Cement Business, Adani Group, said: “Moving from reactive firefighting to a structured maintenance plan was exactly what this operation needed. That kind of peace of mind doesn’t come easily. It comes from a partner that understands how your business runs.”

“We didn’t need a full system overhaul; we needed expert support, actionable insights, and a plan we could execute around our schedule. That’s what we got.”

The project supports ACC’s broader strategy to improve manufacturing efficiency through digital transformation, preventive maintenance and sustainable asset management.

ACC, a subsidiary of Ambuja Cements and part of the Adani Group, operates 20 cement manufacturing facilities and 119 ready-mix concrete plants across India. The company has been advancing initiatives focused on renewable energy, circular economy practices and technology-driven operational improvements.

Alongside Ambuja Cements, ACC is part of a large-scale building materials business committed to achieving net-zero emissions by 2050, with near-term and net-zero targets validated by the Science Based Targets initiative (SBTi).

The Jamul initiative aligns with these sustainability objectives by demonstrating how equipment life extension and digital monitoring can contribute to resource efficiency without requiring large-scale replacement of existing infrastructure.

ABB, a global technology company specialising in electrification and automation, brings more than 140 years of industrial expertise and employs approximately 110,000 people worldwide. Its Motion Services business supports industrial customers through equipment maintenance, modernisation, digital monitoring and lifecycle management solutions.

The agreement also reflects a wider shift in industrial maintenance practices, with manufacturers increasingly adopting predictive technologies to improve equipment availability, manage costs and reduce unplanned shutdowns.

With 25 drives already reconditioned and another 25 scheduled for restoration, ABB’s collaboration with ACC illustrates how targeted modernisation, digital monitoring and circular maintenance practices can extend the operational life of critical equipment while supporting more efficient and sustainable cement production.

Continue Reading

Video Thumbnail
▶

    SIGN-UP FOR OUR GENERAL NEWSLETTER

    Trending News

    SUBSCRIBE TO THE NEWSLETTER

     

    Don't miss out on valuable insights and opportunities to connect with like minded professionals.

     


      This will close in 0 seconds