Connect with us

Concrete

Fornnax Showcases Advanced Primary Shredder Technology

Published

on

Shares

Fornnax Technology successfully participated as a bronze sponsor at the India Rubber Expo (IRE) 2026 in New Delhi, India.

The event offered Fornnax a premier platform to engage directly with tyre recyclers and waste management companies seeking advanced solutions for large-scale pre-processing challenges.

Live on-ground demonstration of the primary shredder
At the heart of Fornnax’s exhibit was a live, on-ground showcase of its flagship Primary Shredder, namely a robust, heavy-duty machine engineered to process a wide range of waste streams including end-of-life tyres (ELT), ferrous & non-ferrous metals, electronic waste (E-waste), and cable waste. The working demonstration allowed visitors and recycling professionals to closely examine its cutting technology, structural build quality, and operational capabilities, which are all designed to deliver consistent feedstock preparation for demanding downstream recycling processes.

Supporting the tyre industry’s shift
The Fornnax showcase arrived at a pivotal moment for the tyre recycling sector. Leading operators, including esteemed Fornnax clients GRP and Fishfa Rubbers, are actively diversifying their portfolios toward high-value output streams, specifically reclaimed rubber and recovered carbon black (rCB).
This strategic transformation demands pre-processing equipment capable of handling large volumes of end-of-life tyres with precision, operational stability, and the throughput consistency that commercial-scale rCB and reclaimed rubber production requires. In direct response, Fornnax has accelerated its innovation roadmap by upgrading cutting geometry, drive configurations, and machine architectures to meet these tighter specifications.
Commenting on the company’s participation at the expo, Jignesh Kundaria, Director and CEO of Fornnax Technology, said:
“At Fornnax, we engineer not just machines, but the backbone of a sustainable recycling infrastructure. Our Primary Shredder is purpose-built to deliver the high-capacity, consistent particle-size output required for the downstream production of recovered carbon black and reclaimed rubber at commercial scale. As our clients evolve their processing lines, we evolve with them by continuously refining our shredding technology to meet tighter material specifications, higher throughput demands, and stricter operational efficiencies. IRE 2026 was the perfect stage to reaffirm that Fornnax is not just a machine manufacturer but rather we are a long-term technology partner in the circular economy.”

Fornnax at the forefront of sustainable industrial progress
Fornnax’s participation at IRE 2026 reaffirms its position as a trailblazer in the industrial shredding and waste processing sector. With a growing global client base, a relentless focus on R&D and NPD, and a deep commitment to enabling the circular economy, Fornnax continues to push the boundaries of what is possible in waste-to-resource transformation across India and international markets.

(Communication by the management of the company)

Concrete

Cement Makers’ Margins To Fall Rs 50-75 Per Tonne Amid West Asia Conflict

Crisil Sees Margins Easing Despite Steady Demand

Published

on

By

Shares



Crisil said operating margins of Indian cement manufacturers are expected to decline by Rs 50-75 per tonne (t) this fiscal to Rs 925-950 per t due to higher input costs triggered by the West Asia conflict. The analysis covered 18 cement companies accounting for nearly 90 per cent of India’s domestic cement capacity and noted margins had improved sharply to around Rs 1,000 per t in fiscal 2026.

Crisil noted that the reduction would be driven mainly by higher power and fuel costs, which account for about 30 per cent of total costs, as petcoke and imported coal prices have surged amid geopolitical uncertainties. Freight costs, which account for about a quarter of total costs, are also expected to remain elevated because of higher diesel prices. The impact on profitability is likely to be more pronounced in the first half of the fiscal year before easing commodity prices moderate cost pressures later.

The rating agency said steady domestic demand and strong balance sheets should keep credit profiles stable despite the moderation in margins. Green energy currently accounts for 35-40 per cent of the sector’s total electricity consumption and is expected to partly cushion higher energy costs. Operating cash flows are likely to remain resilient, supported by projected 6-7 per cent growth in cement demand this fiscal.

Crisil highlighted that demand growth will be driven primarily by infrastructure spending, which meets about one-third of sector consumption, and by a nearly 18 per cent higher budgetary allocation for core ministries that should support project execution. Weaker rural housing demand amid pressure on agricultural incomes from a possible below-average monsoon may be offset by improved urban housing demand supported by favourable home-loan rates and a strong pipeline of Pradhan Mantri Awas Yojana-Urban projects. Ongoing capacity additions will keep capital expenditure elevated and may lift net debt to EBITDA to between 1.2 and 1.4 times from around 1.0 time last fiscal, though ratios are expected to remain healthy.

Continue Reading

Concrete

UltraTech Board Approves Rs 50 bn Fundraise Via NCDs

Company to issue half a million debentures for expansion plan

Published

on

By

Shares



UltraTech Cement’s board of directors has approved raising Rs 5,000 crore (Rs 50 bn) through non?convertible debentures issued in rupees.

The finance committee cleared a proposal to issue up to 500,000 fully paid, unsecured, listed, rated, redeemable, rupee?denominated, non?convertible, non?cumulative debentures of Rs 1 lakh each (Rs 0.1 mn each), aggregating to the Rs 5,000 crore programme.

As of June 2026 the firm reported net debt of Rs 15,875 crore (Rs 158.75 bn) and said its capacity expansion projects under execution are backed by capital expenditure of about Rs 17,000 crore (Rs 170 bn) over the next two to two?and?a?half years.

UltraTech spent Rs 9,500 crore (Rs 95 bn) on capital expenditure in financial year 2026 and in April the group crossed 200.1 mn tonnes per annum of domestic grey cement capacity and 205.5 mn tonnes per annum of global capacity.

The chief financial officer indicated the company would take consolidated capacity beyond 242 mn tonnes per annum, with grey cement capacity reaching 212.7 mn tonnes per annum by the end of financial year 2027. He noted the net debt?to?earnings before interest, taxes, depreciation and amortisation ratio stood at 0.87 times as of June 2026 and the company was confident of ending financial year 2027 with the ratio below one time.

In the first quarter of financial year 2026?27 UltraTech’s net profit attributable to owners rose 16.8 per cent year?on?year to Rs 2,599.3 crore (Rs 25.993 bn) and revenue from operations increased 15.9 per cent to Rs 24,648.20 crore (Rs 246.482 bn). The board approval is expected to complement internal cash flows as the company advances its expansion programme.

Continue Reading

Concrete

Lokesh Lays Stone For Rs 31 Billion Cement Unit In Kadapa

Line-2 expansion to make Kadapa a major cement hub

Published

on

By

Shares



Andhra Pradesh Education and IT Minister Nara Lokesh on Wednesday laid the foundation stone for the Line-2 expansion of Dalmia Bharat Cement at Chinnakomerla village in Mylavaram Mandal in Kadapa district. The project carries an investment of Rs 31 billion (bn) and is slated for completion by the third quarter of the financial year 2028. The expansion is intended to boost industrial growth and employment generation across the Rayalaseema region.

Once commissioned, the Kadapa facility will become Dalmia Bharat’s largest integrated cement manufacturing ecosystem in southern India, creating over 1,000 direct and indirect jobs and opening new business avenues for regional micro, small and medium enterprises and transport operators. Lokesh said the expansion signalled growing corporate confidence in the state and reflected the practical ease of doing business that secured repeat investment.

He placed the project within the government’s wider economic targets and recalled the Yuvagalam padayatra commitment to generate two million (mn) jobs within five years, noting that the state would cultivate talent while industry created opportunities. Lokesh highlighted Andhra Pradesh’s competitive pursuit of major manufacturing accounts, mentioning past successes and a personal initiative to engage global investors when persuading them to anchor expansion in the state.

The plant will leverage Kadapa’s abundant limestone reserves to scale production and sustainability. Clinker capacity is planned to rise from two point five million tonnes per annum (mn tpa) to six point one mn tpa, while overall cement output will increase from three point six mn tpa to nine point six mn tpa. The unit is designed to operate on over eighty per cent renewable energy and deploy waste heat recovery, zero liquid discharge, water recycling and advanced AI systems to optimise efficiency. Industries Minister TG Bharat, BC Welfare Minister S. Savitha and Jammalamadugu MLA C. Adinarayana Reddy attended the ceremony.

Continue Reading

Video Thumbnail

    SIGN-UP FOR OUR GENERAL NEWSLETTER


    Trending News

    SUBSCRIBE TO THE NEWSLETTER

     

    Don't miss out on valuable insights and opportunities to connect with like minded professionals.

     


      This will close in 0 seconds