Concrete
Taking the Technology Highway
Published
5 years agoon
By
admin
Digitisation is no longer an option, it is the need of the hour. More than the fear of losing out to competition, it is factors such as efficiency, returns and sustainability that are fueling IT initiatives in the cement industry. ICR takes a closer look at the IT approach that manufacturers need to take to remain ahead of the curve.
B e it rise in population or increase in development, all roads lead to an unprecedented increase in infrastructure projects worldwide. This has a direct impact on a country’s cement production. While manufacturing is the next most sought-after commodity after water, cement makers are putting in optimum efforts to meet the increasing demand. The cement industry has witnessed numerous changes since the industrial revolution, and the most important one of them – technology – is here to stay. In modern times, with increasing competition, it is imperative for cement manufacturing companies to keep evolving and matching the speed at which the industry and its technology is growing. It is time for cement makers to go digital in their approach.
Digital transformation for cement manufacturers
The process of cement manufacturing startsfrom locating and obtaining its raw materials to making it reach its end consumer. The whole process is labour intensive and can be made more
effective and streamlined by the use of technology. Digitisation has a lot to offer to a cement organisation. Here’s how.
Control over quality and process: What sounds as a simple step by step process of getting raw material, crushing it, processing it and grinding it to form cement involves a lot more detail and parameters to it. It is essential to measure the quality of raw material which is fundamental for a good quality product, monitoring equipment health while chemical processes are on-going and a lot of other factors are involved in the cement making process. With the use of smart systems and technology, operators at each stage can get quick data of the process and make real-time decisions which shall optimise the production and lead to quality results.
Equipment monitoring and health predictions: Any equipment or machinery at a cement plant undergoes wear and tear with large loads of material, continuous running and due to environmental conditions. With systems that can predict the health of these equipment and machinery, monitoring their health and downtime becomes more effective. It also helps avoid any unplanned down-time which results in loss of time and money for the business. It also prevents any accidents with the help of equipment being monitored round the clock.
According to Rizwan Sabjan, Head – Regional Sales Enablement, FLSmidth, “With equipment in continuous use, damage can happen at any time. While visual inspections are important to provide broad, contextualised operational insights, relying only on intermittent site visits puts customers at the risk of missing the early warning signs that could enable them to drastically reduce both downtime and expenses. Online condition monitoring is a continuous service that enables customers to detect potential failures well in advance, giving them plenty of time to take preventative action and avoid actual failure.”
“By contrast, sensors on customer equipment are able to capture data that may be otherwise ‘invisible. Our online condition monitoring services connect this data to the cloud where it is continuously monitored and trended. If something is wrong, an alarm notifies our team of experts who are able to analyse the data remotely and develop a recommended action plan to rectify the fault well ahead of it escalating. It’s a low-stress, low-cost, low-risk approach to maintenance that offers high returns,” he adds.

Automation and IoT: Functioning as the brain and nervous system of the cement plant is automation. From collecting data to automating processes, the sole motive to implement this technology is to achieve effective load management and efficiency in all verticals of the cement manufacturing process. Internet of Things (IoT) is the buzz word in the world of technology and adapting to that has been known to show results for better management and predictive techniques for the business.
Connected logistics: Transportation of material from one floor to another for the next step in the process is a key component of the cement making process. It involves movement of conveyor belts, special carriers and trucks for taking the end product to its distribution sources. These operational activities can be maintained and optimised by using technological solutions that measure the vitals of the vehicles carrying load. There also are multiple software that help plan the movement of the organisation’s fleet. It contributes towards saving time and cost for the business with effective deliveries and on schedule arrivals.
Cyber security: Cement plants are as likely to be hacked or subjected to system viruses. Technology and firewall prevent such incidents from happening.
Embracing digitisation for sustainable future
The way forward for the cement industry is to embrace automation and technology as part of its core for planning combined with goals of achieving sustainability with their efforts. Optimising isn’t just about increasing productivity, it is also about using digital tools and integrating them in cement making processes to be able to make continuous, real-time, automatic adjustments to ensure energy consumption is reduced, giving a more energy efficient operation result.

Stating their vision for cement organisations in 2030, a report published by McKinsey and Company says, pursuing digitisation and sustainability levers are key to significantly boosting productivity and efficiency of a typical cement plant in the future. The result is a margin gain of $4 to $9 per tonne of cement, which would shift a traditional plant to the top quartile of the cost curve for plants with similar technologies. The report also throws light on the CCUS technology, stating that in terms of scalability, it is the most advanced option. Using this technology, cement players capture emitted CO2 and can either pursue carbon-cured concrete (one of the few already available utilization options that locks in CO2 in the end product) or store carbon in former oil and gas fields.
“Talking about the commitment, by 2030 the cement industry contributes to possibly around 0.3 per cent annually, reducing the carbon emissions. So, process control becomes very critical to set your old machines to be very efficient, also making the plant connected which is a lot of technologies kept connected together because then you pull in individual resources and then get on to them at the corporate or an enterprise level which helps you look at everything like a dashboard or one consolidated level and that helps you to mind data through quality, production, process parameters and allowing operator to understand the energy consumption,” says Arvind Kakru, Director Sales, Rockwell Automation.
Digitisation also helps achieve a data driven approach for the use of alternative sources of raw materials and energy. It helps make the operating personal be proactive in their reaction towards the changing conditions of the kilns that can be monitored with the help of technology.
Paving a path for artificial intelligence
Data is the new gold. However, having data is one thing and analysing it for the betterment of business is another. Data analytics is paving the way for artificial intelligence (AI), a new technology that is finding its way into the cement industry. AI by collecting and archiving data from the present and the past has the capability to come up with patterns, anamolies and solutions that may not have been possible to recognise otherwise. Using artificial intelligence in a cement plant will allow operators to take corrective actions before an actual problem occurs. Based on the first results of this technology, cement producers can define new, improved optimisation strategies and new approaches to maintenance concepts, such as predictive and prescriptive maintenance.
Traditional Advanced Process Control (APC) worked on an approach of taking actual measurements in at defined set points in various defined processed. However, use of AI is changing the approach of APC. In something as dynamic as a kiln, unknown variables like alternative fuel types, make the traditional Model Predictive Controllers (MPC) drift over time. The result is that most of these APC systems are out of service or require intensive fine tuning. This is where AI makes a big difference because it can also consider the history of the variables and recognise patterns in these trends.
The key advantage it brings to the process is that AI modules compare actual trends with the trends of the past in a kiln and predict what will happen in the future. In case of a failure, they issue a warning to the operator fairly in advance to avoid the situation and cause unplanned downtime. It even suggests corrective actions and best practices.
Raj Pradhan, Global Delivery Head – Building and Construction Materials, BirlaSoft says, “Digitisation brings complete near real time visibility of end-to-end processes, which helps taking timely decisions to avoid any down time and allows best possible utilisation of resources.”
“In the current competitive market where increase in price is not helping much, the only option left to improvise the margins is through market share and optimisation of cost which can be achieved through automation,” he adds.
It is the era of Industry 4.0, manufacturers across the globe are adapting to technology, automation and data exchange in manufacturing technologies. The future for cement industry is also digitisation to achieve effective process flow, optimum productivity and energy efficiency along with flawless logistics and distribution systems.
–Kanika Mathur
Concrete
NCL Industries Approves Rs. 5.95 bn Solar-Wind Investment
NCL Industries also receives preliminary approval for an Odisha cement plant.
Published
6 days agoon
November 16, 2026By
admin
NCL Industries has approved an investment of Rs. 5.95 bn for Phase 2 and Phase 3 of its 130 MW solar and wind power project in Tuticorin, Tamil Nadu. The approval covers the remaining 80 MW capacity and takes the estimated cost of the entire project to Rs. 9.87 bn.
The company, which manufactures cement, ready-mix concrete and other building materials, had approved the first phase on April 13, 2026. Phase 1 consists of 50 MW and was estimated to cost Rs. 3.92 bn. The project will be financed through a combination of debt and internal accruals.
Separately, the company’s board has granted in-principle approval to pursue a proposal for establishing a cement manufacturing plant in Odisha. NCL Industries plans to approach the Odisha government for project land and will undertake the applications and approvals required for the proposed facility.
The company said the Odisha project remains at a preliminary stage. No land allotment or definitive agreement has been executed, and it has not made any binding commitment to acquire or lease land as of the date of its disclosure.
Further action on the proposed cement plant will depend on applicable regulatory approvals, as well as the company’s additional evaluation and internal approvals. The board’s decision does not therefore represent a final investment commitment for the Odisha facility.
Shares of NCL Industries closed at Rs. 170.40 on the BSE on November 13, 2026, down Rs. 1.85, or 1.07 per cent, from the previous close. The company’s renewable energy expansion is intended to support its power requirements, while the Odisha proposal would add a new manufacturing project to its cement business if approved at a later stage.
Concrete
Cement Makers See Margin Relief as Oil Prices Lower Fuel Costs
Lower fuel costs and higher prices are set to support cement earnings.
Published
6 days agoon
November 16, 2026By
admin
Cement makers are set to see a significant improvement in profitability in the second half of FY27 as falling global oil prices reduce the cost of key fuels, including petcoke and coal. Higher cement prices are also expected to support earnings, according to a report by Systematix Group.
The cement sector remained resilient in Q2 FY27, with volumes across the companies covered by the brokerage rising 7.2 per cent year-on-year. Higher sales volumes and improved realisations contributed to top-line growth during the quarter, although fuel and packaging expenses remained near-term concerns for manufacturers.
The report said the impact of lower oil prices should gradually appear in fuel costs, though the transmission is likely to be delayed. Petcoke and coal prices generally follow movements in crude oil prices, and the recent decline in global oil prices is expected to provide relief in subsequent quarters rather than immediately.
Cement prices improved towards the end of the second quarter, while price increases implemented during September and October are expected to support realisations in H2 FY27. The combination of stronger selling prices and moderation in energy costs could help offset pressure from fuel and packaging expenses, particularly after the third quarter.
Demand conditions are expected to remain supportive, with infrastructure spending, housing demand and a recovery in construction activity after the monsoon set to drive consumption in the coming months. Demand in eastern markets remained subdued because of prolonged monsoon conditions and flooding, while northern, southern and western markets recorded stronger activity.
The report retained a positive view of the sector, citing resilient demand growth of 8 to 9 per cent, improving pricing discipline and the expected moderation in fuel costs. These factors are expected to support a sharp earnings recovery for cement companies during H2 FY27.
Concrete
ABB Extends Drive Lifespan at ACC Cement Plant Without Production Shutdown
Published
1 week agoon
November 12, 2026By
admin
ABB reconditions 25 drives at ACC’s Jamul cement plant, avoiding 16 tonnes of CO₂ emissions while improving reliability through predictive maintenance.
Chhattisgarh
ABB has signed a multi-year Motion OneCare service agreement with ACC Limited, part of the Adani Group, to modernise ageing industrial drives at its Jamul cement plant in Chhattisgarh, improving operational reliability while avoiding approximately 16 tonnes of carbon dioxide (CO₂) emissions without disrupting production.
Announced on 27 October 2026, the agreement combines scheduled drive reconditioning, digital condition monitoring and energy appraisals to extend equipment lifespan, improve plant uptime and optimise maintenance costs. The initiative marks a shift from conventional equipment replacement towards a more resource-efficient approach to industrial asset management.
The first phase, completed in April 2026, involved the on-site reconditioning of 25 ABB ACS800 variable speed drives without a major plant shutdown. By retaining the existing cabinets and restoring the drive modules rather than replacing entire panels, ABB helped ACC preserve capital investment, minimise material consumption and avoid approximately 16 tonnes of CO₂ emissions.
A second phase, covering an additional 25 ACS800 drive modules, is scheduled for the fourth quarter of 2026. The programme is designed to improve long-term equipment reliability while allowing maintenance activities to be aligned with the plant’s operational schedules.
The ACS800 drives, installed at Jamul in 2010, had delivered more than a decade of near-continuous service in demanding cement manufacturing conditions. However, ageing electrical components and changing fault patterns had begun to affect their ability to meet the plant’s reliability requirements.
Rather than opting for complete equipment replacement, ACC engaged ABB’s certified engineers to conduct a comprehensive asset health assessment. The evaluation found that the existing cabinets and enclosures remained structurally sound, making targeted reconditioning a technically viable and cost-effective alternative to full replacement.
Drawing on nearly two decades of experience with ACC’s equipment and operating requirements, ABB developed a maintenance framework tailored to the plant’s shutdown windows, budget cycles and production priorities.
The Motion OneCare agreement incorporates planned equipment restoration, condition-based monitoring and energy assessments, enabling ACC to adopt a more systematic approach to maintaining critical electrical infrastructure.
As part of the programme, ACC has implemented ABB Ability™ Digital Powertrain Insights to monitor drive performance and identify emerging operational issues before they result in equipment failures.
The digital platform provides continuous visibility into parameters such as temperature, current, vibration and fault patterns. These insights allow maintenance teams to detect early signs of equipment deterioration, schedule interventions more effectively and reduce the likelihood of unexpected downtime.
Amit Gupta, Local Division Manager, Motion Services, ABB India, said: “We know what unchecked wear costs over time: a small inefficiency that eats away at ROI for years. At Jamul, the evidence pointed clearly to assets with productive life still in them.”
“Our job was to restore them properly and give the team the tools to stay ahead of the next problem. At ABB, we don’t just fix what fails. We want to protect what works.”
The initiative also demonstrates the growing relevance of circular economy principles in cement manufacturing, where extending the service life of existing industrial equipment can reduce capital expenditure, material consumption and the environmental impact associated with manufacturing replacement components.
According to ABB, drive reconditioning can reduce lifecycle emissions by 50 to 80 per cent compared with complete equipment replacement. By preserving functional components and restoring critical modules, the process helps retain the economic and material value of existing industrial assets.
The addition of energy appraisals in subsequent phases will further expand the programme beyond equipment restoration, enabling ACC to assess drive performance, identify energy-saving opportunities and improve operating efficiency.
For cement manufacturers, variable speed drives play an important role in controlling motors and optimising energy consumption across production processes. Maintaining their reliability and efficiency is essential for minimising operational disruptions and managing electricity costs.
Vinod Bahety, CEO – Cement Business, Adani Group, said: “Moving from reactive firefighting to a structured maintenance plan was exactly what this operation needed. That kind of peace of mind doesn’t come easily. It comes from a partner that understands how your business runs.”
“We didn’t need a full system overhaul; we needed expert support, actionable insights, and a plan we could execute around our schedule. That’s what we got.”
The project supports ACC’s broader strategy to improve manufacturing efficiency through digital transformation, preventive maintenance and sustainable asset management.
ACC, a subsidiary of Ambuja Cements and part of the Adani Group, operates 20 cement manufacturing facilities and 119 ready-mix concrete plants across India. The company has been advancing initiatives focused on renewable energy, circular economy practices and technology-driven operational improvements.
Alongside Ambuja Cements, ACC is part of a large-scale building materials business committed to achieving net-zero emissions by 2050, with near-term and net-zero targets validated by the Science Based Targets initiative (SBTi).
The Jamul initiative aligns with these sustainability objectives by demonstrating how equipment life extension and digital monitoring can contribute to resource efficiency without requiring large-scale replacement of existing infrastructure.
ABB, a global technology company specialising in electrification and automation, brings more than 140 years of industrial expertise and employs approximately 110,000 people worldwide. Its Motion Services business supports industrial customers through equipment maintenance, modernisation, digital monitoring and lifecycle management solutions.
The agreement also reflects a wider shift in industrial maintenance practices, with manufacturers increasingly adopting predictive technologies to improve equipment availability, manage costs and reduce unplanned shutdowns.
With 25 drives already reconditioned and another 25 scheduled for restoration, ABB’s collaboration with ACC illustrates how targeted modernisation, digital monitoring and circular maintenance practices can extend the operational life of critical equipment while supporting more efficient and sustainable cement production.
NCL Industries Approves Rs. 5.95 bn Solar-Wind Investment
Cement Makers See Margin Relief as Oil Prices Lower Fuel Costs
ABB Extends Drive Lifespan at ACC Cement Plant Without Production Shutdown
ABB Drives Digital Transformation at TCI MAX Cement Plant in J&K
Ramco Cements’ Hard Worker Wins Eight Awards at ‘Love of Advertising Awards 2026’
NCL Industries Approves Rs. 5.95 bn Solar-Wind Investment
Cement Makers See Margin Relief as Oil Prices Lower Fuel Costs
ABB Extends Drive Lifespan at ACC Cement Plant Without Production Shutdown
ABB Drives Digital Transformation at TCI MAX Cement Plant in J&K
Ramco Cements’ Hard Worker Wins Eight Awards at ‘Love of Advertising Awards 2026’
Trending News
-
Concrete1 month agoNuvoco reports 13.5% revenue growth in Q2 FY27
-
Concrete1 month agoUltraTech Cement Expands in Andhra Pradesh with Rs. 26.5 bn
-
Concrete3 weeks agoCII Calls for Greater Alternative Fuel Use in Cement Industry
-
Concrete2 weeks agoShree Cement Expands Bangur Concrete Network with Patna Plant

