Concrete

State-of-the-art concrete mixing tower from Liebherr

Published

8 years ago

January 11, 2019

admin

The Betomat holds up to 600 m? of stone in nine silo chambers. The mixing tower is fed with aggregates via two charging hoppers and a powerful bucket elevator with an hourly output of 200 m?/hour.

One of Austria’s most modern concrete mixing plants has been proving its worth since spring 2019. The Liebherr Betomat-type mixing tower was optimally adapted to customer requirements. With the new mixing tower, the Froschl Beton Company is ideally positioned for the future.

The Froschl Beton Company has been supplying construction sites in the Innsbruck area (Austria) with ready-mix concrete for many years. Their 45-year-old mixing plant was technically obsolete and no longer met the standards of today. The wishes and requirements for the replacement purchase were high: Today and in the future, it was supposed to cover the entire concrete logistics chain and deliver flawless concrete efficiently and flexibly.

After an extensive planning phase, Liebherr’s Betomat concept was chosen because it enables the operation of two completely separate mixing plants within one mixing tower. The compact design of the two weighing and mixing lines as well as the Liebherr quality and service were compelling.

The Betomat holds up to 600 m of stone in nine silo chambers. The mixing tower is fed with aggregates via two charging hoppers and a powerful bucket elevator with an hourly output of 200 m?/hour. The plant has seven silos for a binder supply of around 840 tonnes.

The new mixing plant is equipped with two mixer systems: a ring-pan mixer with agitator system and a double-shaft mixer. This means that normal standard concretes as well as high-performance and special concretes can be produced very efficiently. When in operation with both mixer systems, the plant achieves a possible output of around 160 m? of compacted fresh concrete per hour. The tower is equipped with two lanes. Thanks to the separate weighing lines, two vehicles can be loaded simultaneously with different types of concrete – making the mixing plant highly efficient and flexible.

The environment and recycling also play an important role at Froschl Beton. For environmentally-friendly operation, the housing and exhaust air filter systems reduce dust emissions. Noise emissions are also minimised. Residual concrete quantities from the truck mixer and plant cleaning as well as re-concrete quantities are processed in the LRS 908 residual concrete recycling plant. Washed-out material and residual water can be returned to concrete production. This enables considerable cost and material savings.

The longevity of the plant is ensured not only by high-quality components but also by a precisely fitting steel construction from the Liebherr plant in Bad Schussenried. To ensure smooth operation even during the cold winter months, the entire plant is insulated with a 100 mm insulated wall and equipped with heating.

For further information: Klaus Eckert at klaus.eckert@liebherr.com

Concrete

JK Lakshmi Cement Begins Rs 110 Billion Assam Plant Project

The 2.5 MTPA integrated cement plant is expected to be completed by FY2029.

Published

56 minutes ago

October 31, 2026

admin

JK Lakshmi Cement has recently laid the foundation stone for Project Kamakshi, its first integrated cement manufacturing facility in Assam, marking its entry into Northeast India. The groundbreaking ceremony was held at Umrangso village in Dima Hasao district in the presence of Assam Chief Minister Himanta Biswa Sarma.

The project involves an investment of Rs 110 billion, including the mining lease, and will have an annual cement production capacity of 2.5 million tonnes, supported by a 1 million tonne clinkerisation unit. Scheduled for completion by FY2029, the facility is expected to generate employment for over 2,000 people while catering primarily to the growing Northeast market.

The integrated plant will feature dedicated railway sidings to facilitate efficient transportation of raw materials and finished cement, strengthening supply chain reliability and regional distribution.

Vinita Singhania, Chairperson and Managing Director, JK Lakshmi Cement, said, “”Project Kamakshi is the start of a long-term relationship with Assam and the wider North East. This is a region that is building fast, and it deserves quality cement made close to home. With this plant, we want to bring scale, jobs, and dependable supply to the region. At JK Lakshmi Cement, we believe that building a stronger India goes beyond infrastructure. It is also about growing together with the communities we serve.””

The investment aligns with the company’s strategy to expand into high-growth markets beyond its established presence in Northern, Western and Eastern India. The project is also expected to support regional economic development and infrastructure growth.

JK Lakshmi Cement aims to pursue its expansion plans while working towards its long-term target of achieving net-zero emissions by 2047.

Concrete

JK Lakshmi Cement to Expand EV Fleet to 120 Vehicles by March 2027

JK Lakshmi Cement has deployed more than 70 EVs across its logistics network.

Published

1 day ago

October 30, 2026

admin

JK Lakshmi Cement has deployed more than 70 electric vehicles (EVs) across its logistics network and plans to increase the fleet to 120 vehicles by March 2027. The expansion is part of its decarbonisation strategy, which aims to reduce transport-related emissions and improve operational efficiency.

The company has achieved nearly 100 per cent EV-based clinker dispatches from its Sirohi plant in Rajasthan to the Kalol Grinding Unit in Gujarat. The transition marks an increased use of electric mobility for long-haul cement transportation and is intended to lower the environmental impact of logistics operations.

The existing fleet operates on routes connecting the Sirohi plant with the Kalol Grinding Unit, Palanpur Unit and Surat Grinding Unit. JK Lakshmi Cement is working with electric vehicle logistics providers SwitchLabs and Billion E to support fleet deployment and manage transportation requirements across these routes.

The company expects the planned expansion to increase the use of electric mobility throughout its logistics network for moving cement and clinker. Chairperson and Managing Director Vinita Singhania said the programme reflected the integration of sustainable practices with the company’s focus on long-term business efficiency, while describing the Sirohi–Kalol transition as an important step in its wider decarbonisation strategy.

The EV programme forms part of JK Lakshmi Cement’s green logistics and sustainability roadmap, alongside initiatives to improve efficiency and reduce emissions across its value chain. The company has set a long-term target of achieving net-zero emissions by 2047. It is part of the JK Organisation and operates integrated cement plants in Rajasthan and Chhattisgarh, along with grinding units in Gujarat, Haryana and Odisha. The company has an annual turnover of more than Rs. 60 bn, combined cement capacity of approximately 18 mn t per annum and a target to raise capacity to 30 mn t by 2030. Its portfolio includes ready-mix concrete, gypsum plaster, wall putty, primer, adhesives and fly ash blocks.

Concrete

Martin Engineering Appoints Ashwini Khunte as India General Manager

Published

1 day ago

October 30, 2026

admin

Martin Engineering names Ashwini Khunte India General Manager to strengthen operations and drive growth across key bulk material handling sectors.

Pune

Martin Engineering, a global provider of bulk material handling solutions, has appointed Ashwini Khunte as General Manager of its India business, strengthening its leadership as the company expands its presence across the country’s cement, mining, steel, power and infrastructure sectors.

Khunte brings more than a decade of experience with Martin Engineering, having joined its Indian operations in 2013 as a Design Engineer, shortly after the company established its presence in the country in 2012.

A mechanical engineer by qualification, she spent her initial five years developing bulk material handling solutions in collaboration with the company’s operations team. During this period, she gained extensive experience addressing operational challenges in the steel, cement and coal industries. She subsequently moved into project engineering, managing major engineering, procurement and construction (EPC) and original equipment manufacturer (OEM) projects from initial enquiry to commissioning. Her responsibilities later expanded to overseeing Martin Engineering’s conveyor product portfolio in India, involving customer engagement, technical presentations and site visits across heavy industries.

In 2024, Khunte was promoted to Head of Sales & Marketing for the company’s Europe, Middle East, Africa and India (EMEAI) region. The position broadened her international market exposure and strengthened her strategic and commercial leadership capabilities.

Commenting on her appointment, Ashwini Khunte, General Manager, Martin Engineering India, said: “India represents a tremendous opportunity for Martin Engineering. The country’s continued investment in cement, mining, steel, power and infrastructure is creating increasing demand for safer, cleaner and more productive bulk material handling, and that’s exactly what we do. My priority will be to build on the strong foundations already established in India, while continuing to develop our people, strengthen customer relationships and bring practical solutions to the challenges faced by our industry.”

Robert Whetstone, Area Vice President – EMEAI, Martin Engineering, highlighted Khunte’s technical expertise, market understanding and leadership experience.

“Ashwini brings an exceptional combination of technical understanding, customer knowledge and commercial leadership. She has grown as Martin Engineering has grown, and has consistently demonstrated outstanding capability to transform her expertise into practical solutions. Her knowledge of the Indian market, together with her international experience, makes her ideally suited to lead our India business through its next stage of growth for years to come.”

Since establishing its Indian business in 2012, Martin Engineering has expanded its local workforce, manufacturing capabilities and dealership network. The company supplies conveyor products, transfer point solutions, material flow aids, training and technical support to bulk material handling industries. Khunte’s appointment positions the company to further strengthen customer relationships and expand its solutions portfolio in India’s growing industrial and infrastructure markets.