Concrete

Scarcity of Domestic Gypsum Supply

Published

3 years ago

July 17, 2023

admin

The Indian cement manufacturers are likely to face serious challenges regarding gypsum availability and cost in the near future. Ramachandran, Chief Executive Officer, Zawawi Minerals LLC, Sultanate of Oman, discusses how identifying and ensuring a consistent supply of gypsum will become an on-going challenge.

The Indian cement demand is set for its third straight year of growth with a 7 per cent to 9 per cent jump to over 400 million tonnes in fiscal 2024. Cement demand in India is expected to continue growing for the next few years, backed by the government’s push for infrastructure development and increasing demand in the housing sectors. However, India has a scarcity of domestic gypsum supplies, which does not bode well for the fast-growing cement industry. An essential, non-substitutable critical raw material, gypsum is required for all varieties of cement production.
Since 2009, the gypsum supply deficit in the Indian domestic market has led to increased dependence on largely imports of natural gypsum predominantly from the Sultanate of Oman, and other countries like Iran, Thailand, small volume from Pakistan and Bhutan by road to the northern part of India. This dependency shall continue in coming years and is growing day by day.
FY 2009 to 2023, India imported 57.09 million tonnes of gypsum cumulatively, witnessed at a CAGR of 16.60 per cent. The gypsum import volume represents nearly 35 per cent of the total gypsum consumed by the cement industry. The Sultanate of Oman alone supplied 28 million tons (49.05 per cent) and the remaining 29.09 million tonnes were from Thailand, Iran, Pakistan and Bhutan etc. FY 2022 to 2023 – India imported 5.76 million tons of gypsum, which represents 35 per cent of the total gypsum consumption. The Sultanate of Oman supplied 5.20 million tons (90.39 per cent) and the remaining 0.56 million tonnes are from Thailand, Iran and Bhutan.
According to the production growth of cement and gypsum board, the industry’s demand for gypsum is expected to reach nearly 380 million tons cumulatively by FY 2037-2038 with a CAGR of 5.15 per cent. The maximum local gypsum supplies could be around 200 million tons, which includes FGD gypsum, Phospho-gypsum, Natural gypsum etc. The limited availability of domestic gypsum will lead to supply constraints and increased dependence on imports, cumulatively needing to import nearly 180 million tonnes of gypsum to meet the domestic demands.
Natural Gypsum: India’s local natural gypsum production and supplies are limited due to deep seated gypsum reserves not feasible for mining.
Phospho-gypsum: Phospho-gypsum production in India is limited, the majority of the existing Phosphop-gypsum stockpile may be consumed for on-going road construction, as reported by the Ministry of Road Transport and Highways. Recently, the Central Road Research Institute (CRRI) carried out an R&D project to explore the feasibility of Phospho-gypsum for road embankment and subgrade construction. The performance of Phospho-gypsum was as good as conventional sand embankment. It was concluded that 100 per cent of Phospho-gypsum can be used for both embankment and subgrade construction.
An Indian fertiliser company has constructed a road using phosphor-gypsum, which was evaluated by the CRRI. Based on their report, the Indian Road Congress (IRC) has been accredited for using phosphor-gypsum waste material for the road constructions.
FGD (Flue Gas Desulphurisation) gypsum: The production growth of FGD gypsum uncertainty shall continue due to huge investments of over US$ 13 billion for installing FGD units by the heavy debt-burden coal power companies. India had initially set a 2017 deadline for 2,11,520 MW thermal power plants to install FGD units to cut Sulphur emissions. That was later changed to varying deadlines for different regions, ending in 2022, and further extended to a period up to 31st December 2026. According to the latest guidelines, the power plant which have plans to retire before 31st December 2027 will now be exempted from installing FGD units and if the non-retiring power plants fail to adhere to the new deadlines, they will have to pay ‘environmental compensation’ ranging from 20 paise to 40 paise per unit electricity generated.
According to the Central Electricity Authority (CEA) the FGD unit implementation status as of May 2023 – only 9,280 MW (4.40 per cent) capacity already installed and only 1,00,430 MW have been awarded bids for installing FGD units.
On the other hand, considering the huge capital investments, limestone costs for the FGD process and other operating costs, the FGD gypsum will not be available at a cheaper price for the Indian consumers – only the limestone cost itself for the production of per tonne FGD gypsum will be US$ 18 or above.

Gypsum Export Supply Outlook
Supply from Thailand: Asia’s past dominant gypsum exporter began to cap their exports with the goal of conserving resources for their own significant domestic industries. The government authority regulated the minimum FOB (Free on Board) export selling price. Presently Thailand exports its gypsum at an FOB price of over US$ 20 per tonne and exports over 97 per cent of its gypsum to the historical gypsum importing countries in Southeast Asia.
Supply from Iran: Iran gypsum export volume significantly started falling after tightening the sanction parameters. Gypsum exports to India started dropping, the exports dropped to 0.17 million tonnes in the FY 2022-2023 from 1.57 million tonnes in the FY 2021-2022, nearly 89.35 per cent dropped.
Historically, Iran exports around 10 per cent of its annual production of gypsum majority to India and other GCC countries like UAE, Qatar etc. If the sanctions are lifted, the Iranian construction and infrastructure sector will grow exponentially, and this will create an immense demand for gypsum in the local construction industries. Hence, the gypsum export volumes shall be limited and the FOB selling price may be increased to the level of the pre-sanction period, i.e., FOB US$ 14 -15 per ton or more.
Supply from the Sultanate of Oman: The World’s largest gypsum supplier – Oman exports nearly 10 million tonnes of gypsum yearly, which is 50 per cent of Asia, Southeast Africa and GCC countries’ imported gypsum demand. Oman exports 50 per cent of its total volume to India and the remaining 50 per cent are exported to the historical gypsum importers like Bangladesh, Indonesia, Malaysia, Vietnam, Philippines, Japan, South Korea, UAE, Southeast Africa etc.
Gypsum, key critical raw material for the cement and gypsum board manufacturing industries, much of the imported gypsum consuming the above countries is now turning to the Sultanate of Oman for its requirements of the commodity. The Sultanate of Oman is emerging as the single most important supply source for gypsum, with no rivals. However, Oman’s present exportable gypsum reserves are very limited.
The Government authority of the Sultanate of Oman introduced w.e.f. January 2017, a FOB floor price of US$ 12.50 per ton of raw gypsum exported out of the country, which is keen to increase the FOB prices in coming years to meet its own objectives, to increase the country’s non-oil export revenue.
Even though gypsum accounts for just 2 per cent to 3 per cent of the total cost of cement sales, the Indian cement manufacturers are likely to face serious challenges regarding its availability and cost in the near future. Identifying and ensuring a consistent supply of gypsum will become an on-going challenge.

Data Sources

Global cement magazine
Global gypsum magazine
The Fertiliser Association of India (FAI)
Central Electricity Authority of India (CEA)
The Ministry of Energy and Mining – The Sultanate of Oman
Directorate General of Foreign Trade (DGFT) – Government of India
The Ministry of Road Transport and Highways of India
The Central Road Research Institute (CRRI) of India
Various published reports on Cement and Gypsum industries

ABOUT THE AUTHOR
Ramachandran is the Chief Executive Officer with Zawawi Minerals LLC in The Sultanate of Oman.

Up Next

Cement demand to outpace supply growth

Don't Miss

Driving Efficiency

Concrete

Ultra Concrete Age

Prof. A. S. Khanna (Retd., IIT Bombay) on how Ultra-high performance concrete (UHPC) improves strength, durability and lifecycle performance.

Published

56 minutes ago

April 1, 2026

admin

The need of present time is stronger buildings, industrial or common utility buildings, such as Malls, Railway stations, hospitals, offices, bridges etc. For this, there is need of long durable, tough and stable concrete, which could stand under normal and seismic conditions. Tough railway bridges are required for bullet trains to pass without any damage. Railway tunnels, sea-links, coastal roads, bridges and multistorey buildings, are the need of the hour. The question comes, is the normal cement called OPC is sufficient to take care of such requirements or better combination of cements and sand mixtures is required?

Introduction

A good stable building structure can be made with a good quality of cement+sand+water system. Its quality can be enhanced by keeping the density of admixture higher (varies from 30 in normal buildings to bridges etc to 80). Further enhancement in the properties of various cements admixtures is made by adding several additives which give additional strength, waterproofing, flexibility etc. These are called construction chemicals…

To read the full story Click Here

Concrete

NCB Signs MoU With Cement Manufacturer To Boost Construction Skills

Partnership to deliver nationwide training and certification

Published

13 hours ago

March 31, 2026

admin

The National Council for Cement and Building Materials (NCB) has signed a memorandum of understanding with a leading cement manufacturer to strengthen skill development and capacity building in the construction sector. The agreement was formalised at NCB premises in Ballabgarh and was signed by the Director General of NCB, Dr L. P. Singh, and the head of technical services at UltraTech Cement Limited, Er Rahul Goel. The collaboration seeks to bring institutional resources and industry expertise into a structured national training effort.

The partnership will deliver structured training and certification programmes across the country aimed at enhancing the capabilities of civil engineers, ready?mix concrete (RMC) professionals, contractors, construction workers and masons. Programme curricula will cover material quality testing, concrete mix proportioning, durability assessment and sustainable construction practices to support improved construction outcomes. Emphasis is to be placed on standardised assessment and certification to raise practice levels across diverse construction roles.

Practical learning elements will include workshops, site demonstrations, technical seminars and exposure visits to plants and RMC facilities to strengthen applied skills and on?site decision making. The Director General indicated confidence that a large number of professionals and workers would be trained over the next three to five years under the initiative. The partnership is designed to complement flagship government schemes such as the Skill India Mission and to align training outputs with national infrastructure priorities.

By combining the council’s technical mandate with industry experience, the initiative aims to develop a more skilled and quality?conscious workforce capable of meeting rising demand in infrastructure and housing. NCB will continue to coordinate programme delivery and quality assurance while industry partners provide practical exposure and technical inputs. The collaboration is expected to support long?term capacity building and more sustainable construction practices nationwide.

Concrete

JSW Cement Commissions Nagaur Plant, Enters North India

New Rajasthan unit boosts capacity to 24.1 MTPA and expands reach

Published

2 days ago

March 30, 2026

admin

JSW Cement has strengthened its national presence by commencing production at its greenfield integrated cement plant in Nagaur, Rajasthan, marking its entry into the north Indian market.

With this commissioning, the company’s installed grinding capacity has increased to 24.1 MTPA, while total clinker capacity, including its joint venture operations, stands at 9.74 MTPA.

The Nagaur facility comprises a 3.30 MTPA clinkerisation unit and a 2.50 MTPA cement grinding unit, with an additional 1.00 MTPA grinding capacity currently under development. Strategically located, the plant is positioned to serve high-growth markets across Rajasthan, Haryana, Punjab and the NCR.

The project has been funded through a mix of equity and long-term debt, with Rs 800 crore allocated from IPO proceeds towards part-financing the unit.

Parth Jindal, Managing Director, JSW Cement, stated that the commissioning marks a key milestone in the company’s ambition to become a pan-India player. He added that the project was completed within 21 months and positions the company to achieve its targeted capacity of 41.85 MTPA by FY29.

Nilesh Narwekar, CEO, JSW Cement, highlighted that the expansion aligns with the company’s strategy to tap into rapidly growing northern markets driven by infrastructure development. He noted that the company remains focused on delivering high-quality, eco-friendly cement solutions while progressing towards its long-term capacity goal of 60 MTPA.

The Nagaur plant has been designed with sustainability features, including co-processing of alternative fuels and a 7 km overland belt conveyor for limestone transport to reduce road emissions. The facility will also incorporate a 16 MW Waste Heat Recovery System to improve energy efficiency and lower its carbon footprint.

JSW Cement, part of the JSW Group, operates across the building materials value chain and currently has eight plants across India, along with a clinker unit in the UAE through its joint venture.