Connect with us

Projects

SIBCO – Complete solutions for bearing housings and accessories

Published

on

Optimized performance solutions for a wide range of industrial applications

SIBCO is an SKF Group brand and the offerings as a part of SIBCO cover a wide range of industrial applications. SIBCO solutions deliver the same superior quality and performance that one associates with the SKF brand.

SIBCO SNI Housings
Optimized solutions designed for maximum reliability and minimal maintenance Bearing housings are critical as they help to support the bearing, transmit the loads and also protect the bearing and lubricants from contamination. Bearing housings play a key role in maximizing the performance and service life of the incorporated bearing.

SIBCO SNI housings are split plummer block housings primarily designed for self-aligning ball bearings and spherical roller bearings mounted directly on cylindrical shafts or on adapter sleeves. The design of SIBCO housings provides different options for the selection of bearings and methods of mounting. All standard SIBCO SNI housings are made of grey cast iron. However, SKF also manufactures a range of SIBCO housings of SNI design in spheroidal graphite cast iron and cast steel. The dimension of the SIBCO SNI plummer block housings conform to ISO 113 standard.

SIBCO Accessories
Sleeves, locknuts and lock washers designed for longer life and easier maintenance SKF through its SIBCO brand offers high quality sleeves which ensure optimal bearing performance. Adapter sleeve is the most commonly used component for locating bearings with tapered bore onto a cylindrical seat, as they can be used on a plain or stepped shaft. Adapter sleeves are easy to install and require no additional location on the shaft. All standard SIBCO adapter sleeves are made of 0.20% – 0.30% carbon steel. However, larger sleeves and sleeves of special types are made of 0.30% – 0.45% carbon steel. The dimension of the metric adapter and withdrawal sleeves conform to ISO 2982-1 standard. Withdrawal sleeves are also available on request as part of the SIBCO range.

Stiffer and robust housing
The engineered and optimized design of SIBCO SNI plummer block housings, together with improved material grade, make them more robust compared to other housings in the market. With additional ribs in the base, SIBCO housings are stiffer

Grease level marking
To avoid over-filling, markings at each corner inside the housing base indicate the proper grease level for an initial 20 or 40% fill of the free space between housing and bearing.

Better heat dissipation
There are additional ribs in the base at sides and center which increases the contact area between base and the support surface. This reduces operating temperatures and increases the service life of the bearings, seals and lubricant.

Dimples to lock accessories and improved lubrication facilities Dimples cast into the housing cap indicate where grease fittings and condition monitoring sensors can be mounted for maximum effectiveness.

Improved markings on housings
The housing cap and base are matched during manufacturing and are not inter-changeable with the caps and bases of other housings. The serial number on both housing parts is more readable to help avoid any mismatches. The designation on the housing cap has also been enhanced for readability & better traceability.

Simple mounting and dismounting
To simplify mounting and make alignment more accurate, lines indicating the centre of the bearing seat and housing bore axis are cast into the housing base. Dimples indicate the position for dowel pins

Product Assortment:

  • Housings
  • Seals
  • Sleeves
  • Lock nuts
  • Lock washers

Features

  • Better machining quality – Faster, easy and precise mounting
  • Optimized running performance – Allows higher speed, silent running and minimized vibration
  • Superior material quality – Higher load carrying capacity & longer bearing service life

Benefits

  • Reduced downtime and maintenance costs
  • Increased efficiency and reliability
  • Reduced warranty costs
  • Increased energy savings
  • Reduced total cost of ownership

Customer Benefits

  • Reduced unplanned downtime
  • Reduced maintenance and warranty costs
  • Increased efficiency and reliability
  • Easy serviceability

For more information,
contact Uma Tiwari +91- 97 66 011199

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Projects

Adani Group to invest Rs 55,000 cr in Gujarat projects, including cement plant

Published

on

By

Billionaire Gautam Adani announced over Rs 55,000 crore investment in next five years in a clutch of projects in Gujarat including the world’s largest solar park, a copper plant, a cement unit, and a lithium battery manufacturing complex, envisaging direct employment to 50,000 people.

Adani Group, which operates Mundra port in the state, announced plans to foray into petrochemical business with a Rs 16,000 crore project with German chemical major BASF.

Speaking at the 9th Vibrant Gujarat Summit here, Adani said his group’s investments in Gujarat in the past five years exceed Rs 50,000 crores and “we are further accelerating our investments.”

“Over the next 5 years, our investments will include the world’s largest solar hybrid park in Khavda. The anticipated investment in this park is Rs 30,000 crore. We also plan to establish a 1 GW Data Center Park in Mundra, a one million ton copper smelting and refining project, a cement and clinker manufacturing unit in Lakhpat, an integrated Lithium battery manufacturing complex and expand our Photovoltaic manufacturing capabilities. Overall, we anticipate a total of Rs 55,000 crore of investment in all these projects,” he said.

Image Source: Google

Continue Reading

Projects

Bangladesh’s Chhatak Cement announces modernisation project

Published

on

By

Bangladesh’s Chhatak Cement Co Ltd has announced plans to modernise its facility and convert it from wet process to dry process. The company has begun to prepare a development project proposal, with a schedule to implement the upgrades by 2021.

According to company officials, Chhatak Cement has incurred an accumulated loss of over BDT3.63bn (US$43.25m) between FY13-14 and FY17-18, mainly due to its outdated machinery resulting in loss of production capacity. The plant is currently operating at 70,000 tonnes per annum (tpa).

However, the new project is anticipated to boost production capacity and increase annual company profit to around BDT1bn. The modernisation is expected to be financed by a BDT8.9bn investment from the government, with BDT5.34bn as a loan with a payback period of seven years and the rest as equity, according to The Financial Express.

Image Source: Google

Continue Reading

Projects

Forced shutdown of Viet-Dung Quat cement plant in Vietnam

Published

on

By

The Dai Viet-Dung Quat cement plant has been forced to temporarily shut down in the central province of Quang Ngai due to environmental pollution. Since 26 May, the locals had gathered in front of the plant to call for a shutdown.

Director of Central Region Cement JSC Trinh Van Dien, investor in the Dai Viet-Dung Quat cement plant, said, “We invited an environmental monitoring team to check the dust concentration and the results are safe. The local Department of Natural Resources and Environment hasn?t reached a conclusion on the noise level yet.”

He added, “We?ve had to temporarily close the plant, meaning we”re losing VND300m (US$13,437) and the 100 workers are kicking their heels at home. I don”t know what to do.”

The ground clearance work should have been done this year but the coal-powered plant project was delayed until 2020. As a result, the ground clearance work has also been delayed.

According to the locals, they want to be compensated for the relocation if the plant stays. “We don?t want to stay. We have to move,” local Nguyen Ne said.

Image Source: Google

Continue Reading

Trending News

© COPYRIGHT 2021 ASAPP Info Global Services Pvt. Ltd. All Right Reserved.