Connect with us

Concrete

ICRA Flags Margin Pressure Despite Steel Demand Growth

FY26 demand seen up 8 per cent, but prices to cap profitability

Published

on

Shares

Domestic steel demand in India is expected to grow by around 8 per cent in FY26, although softer steel prices are likely to keep profitability under pressure for producers, according to ICRA.

In a recent report, the rating agency projected the industry’s operating margin to remain largely flat at about 12.5 per cent in FY26, lower than its earlier expectation of an improvement. It noted that while demand growth remains healthy, incremental capacity additions have created a temporary surplus, resulting in continued pressure on steel prices.

“Although steel demand growth is projected at 8 per cent for FY26, additional supply has led to a near-term surplus, weighing on prices,” said Girishkumar Kadam, Senior Vice-President and Group Head, Corporate Sector Ratings, ICRA.

Domestic hot-rolled coil (HRC) prices, which had risen to Rs 52,850 per tonne in April 2025 following the imposition of a safeguard duty, corrected to around Rs 46,000 per tonne in November and are currently trading below import parity. At a global level, structural headwinds in China have pushed its steel exports to an all-time high of 88 million tonnes in the first nine months of calendar year 2025, further weighing on international prices.

Chinese HRC export prices averaged about USD 465 per tonne during the first seven months of FY26, compared with USD 496 per tonne in the corresponding period a year earlier. While India’s finished steel imports have declined sharply by around 33 per cent year-on-year in the current financial year, ICRA stressed that the continuation of the safeguard duty remains critical to prevent a resurgence in imports.

Under its base-case scenario, the agency expects domestic HRC prices to average around Rs 50,500 per tonne in FY26. Operating profit per tonne of steel production is estimated at USD 108, marginally lower than the USD 110 per tonne recorded in FY25. The overall sector outlook has been maintained at ‘Stable’.

ICRA also highlighted execution and balance-sheet risks linked to the industry’s large capacity expansion plans. Domestic steel producers are targeting capacity additions of 80–85 million tonnes over FY26–31, involving investments of USD 45–50 billion. However, the agency cautioned that unless earnings improve meaningfully, such large-scale investments could lead to a sharp rise in industry leverage over the medium term.

On green steel, Kadam said its share in India’s total steel demand is expected to rise from about 2 per cent, or roughly 4 million tonnes, in FY30 to nearly 40 per cent, or around 150 million tonnes, by FY50. However, he added that the economics remain challenging, with widespread adoption unlikely until green hydrogen prices decline to around USD 1.5–1.6 per kg, a level not expected in the near to medium term.

Concrete

Ultra Concrete Age

Prof. A. S. Khanna (Retd., IIT Bombay) on how Ultra-high performance concrete (UHPC) improves strength, durability and lifecycle performance.

Published

on

By

Shares
The need of present time is stronger buildings, industrial or common utility buildings, such as Malls, Railway stations, hospitals, offices, bridges etc. For this, there is need of long durable, tough and stable concrete, which could stand under normal and seismic conditions. Tough railway bridges are required for bullet trains to pass without any damage. Railway tunnels, sea-links, coastal roads, bridges and multistorey buildings, are the need of the hour. The question comes, is the normal cement called OPC is sufficient to take care of such requirements or better combination of cements and sand mixtures is required?
Introduction
A good stable building structure can be made with a good quality of cement+sand+water system. Its quality can be enhanced by keeping the density of admixture higher (varies from 30 in normal buildings to bridges etc to 80). Further enhancement in the properties of various cements admixtures is made by adding several additives which give additional strength, waterproofing, flexibility etc. These are called construction chemicals…

Continue Reading

Concrete

NCB Signs MoU With Cement Manufacturer To Boost Construction Skills

Partnership to deliver nationwide training and certification

Published

on

By

Shares

The National Council for Cement and Building Materials (NCB) has signed a memorandum of understanding with a leading cement manufacturer to strengthen skill development and capacity building in the construction sector. The agreement was formalised at NCB premises in Ballabgarh and was signed by the Director General of NCB, Dr L. P. Singh, and the head of technical services at UltraTech Cement Limited, Er Rahul Goel. The collaboration seeks to bring institutional resources and industry expertise into a structured national training effort.

The partnership will deliver structured training and certification programmes across the country aimed at enhancing the capabilities of civil engineers, ready?mix concrete (RMC) professionals, contractors, construction workers and masons. Programme curricula will cover material quality testing, concrete mix proportioning, durability assessment and sustainable construction practices to support improved construction outcomes. Emphasis is to be placed on standardised assessment and certification to raise practice levels across diverse construction roles.

Practical learning elements will include workshops, site demonstrations, technical seminars and exposure visits to plants and RMC facilities to strengthen applied skills and on?site decision making. The Director General indicated confidence that a large number of professionals and workers would be trained over the next three to five years under the initiative. The partnership is designed to complement flagship government schemes such as the Skill India Mission and to align training outputs with national infrastructure priorities.

By combining the council’s technical mandate with industry experience, the initiative aims to develop a more skilled and quality?conscious workforce capable of meeting rising demand in infrastructure and housing. NCB will continue to coordinate programme delivery and quality assurance while industry partners provide practical exposure and technical inputs. The collaboration is expected to support long?term capacity building and more sustainable construction practices nationwide.

Continue Reading

Concrete

JSW Cement Commissions Nagaur Plant, Enters North India

New Rajasthan unit boosts capacity to 24.1 MTPA and expands reach

Published

on

By

Shares
JSW Cement has strengthened its national presence by commencing production at its greenfield integrated cement plant in Nagaur, Rajasthan, marking its entry into the north Indian market.
With this commissioning, the company’s installed grinding capacity has increased to 24.1 MTPA, while total clinker capacity, including its joint venture operations, stands at 9.74 MTPA.
The Nagaur facility comprises a 3.30 MTPA clinkerisation unit and a 2.50 MTPA cement grinding unit, with an additional 1.00 MTPA grinding capacity currently under development. Strategically located, the plant is positioned to serve high-growth markets across Rajasthan, Haryana, Punjab and the NCR.
The project has been funded through a mix of equity and long-term debt, with Rs 800 crore allocated from IPO proceeds towards part-financing the unit.
Parth Jindal, Managing Director, JSW Cement, stated that the commissioning marks a key milestone in the company’s ambition to become a pan-India player. He added that the project was completed within 21 months and positions the company to achieve its targeted capacity of 41.85 MTPA by FY29.
Nilesh Narwekar, CEO, JSW Cement, highlighted that the expansion aligns with the company’s strategy to tap into rapidly growing northern markets driven by infrastructure development. He noted that the company remains focused on delivering high-quality, eco-friendly cement solutions while progressing towards its long-term capacity goal of 60 MTPA.
The Nagaur plant has been designed with sustainability features, including co-processing of alternative fuels and a 7 km overland belt conveyor for limestone transport to reduce road emissions. The facility will also incorporate a 16 MW Waste Heat Recovery System to improve energy efficiency and lower its carbon footprint.
JSW Cement, part of the JSW Group, operates across the building materials value chain and currently has eight plants across India, along with a clinker unit in the UAE through its joint venture.

Continue Reading

Video Thumbnail

    SIGN-UP FOR OUR GENERAL NEWSLETTER


    Trending News

    SUBSCRIBE TO THE NEWSLETTER

     

    Don't miss out on valuable insights and opportunities to connect with like minded professionals.

     


      This will close in 0 seconds