Concrete

Cement industry to witness improved demand from July 2021

Published

6 years ago

March 5, 2021

admin

According to CARE Ratings, the demand for cement will improve in a calibrated manner from July 2021 onwards. CARE Rating states that a double-digit cement volume growth seems unlikely at present for FY22, considering the uncertainty for the constantly evolving covid situation in the country. However, it also states that the profitability for cement players expects to remain healthy during FY22, considering the factors such as expected higher volumes and continuing pricing power enjoyed by cement companies which are likely to balance the cost pressures considerably. In terms of debt, most of the cement companies will be seen to continue their focus on strengthening their balance sheet during FY22. Moreover, report says that profits for FY22 will remain moderate due to increasing input costs for pet coke, diesel, coal, and packing materials, etc.

Today, the economic conditions of our country remain volatile. Considering this into account, the unlocking process that was earlier predicted for May 2021, has now been pushed to July 2021. This has affected the overall demand for cement for Q1FY22. The second wave came with a lot of uncertainties and shattered the overall demand during the last quarter of FY21. On the one hand, we see that the supply constraints are low because of the reopening of operations for the cement manufacturing companies; however, with a higher rate of infection in the rural areas, the demand for cement from rural got weaker.

CARE Ratings expects that for FY22, the domestic cement production may grow by around 4%-7% y-o-y after two consecutive years of de-growth against the initial estimate of 11%-14%. Demand for cement will directly depend on factors like the government?? push and spending towards infrastructure creation and development, pent-up urban demand, and continuing rural demand. However, the severity of ongoing pandemic will have direct impact on the timelines for demand revival for the cement industry.

Looking at Q1FY21, which was severely hit by the pandemic, the industry witnessed a swift recovery wherein domestic cement production reached 88% of pre-Covid levels (i.e., 88% of Q2FY20, states CARE Rating report. It further reports that during Q2FY21 and for Q3FY21, production was 96% of the corresponding period the previous year. Monthly domestic cement reached pre-Covid levels during March 2021 and was approximating to March 2019 levels. Overall, the domestic cement production has fallen by 12% during FY21 vis-?-vis FY20 as against the initial estimate of de-growth of 25%-30% made in April 2020.

For FY22, CARE Ratings estimates its entire portfolio of investment-grade cement companies will report stable performance with the aggregate rated debt of around Rs.23,964 crore. Most cement companies will be focusing on strengthening their balance sheets. However, it also states that the profitability for cement players is expected to remain moderate during FY22, due to increasing input costs especially for pet coke, diesel, coal, and packing materials, etc. Furthermore, CARE Rating also states that the liquidity for a majority of the CARE-rated investment grade portfolio is likely to remain strong or adequate in FY 2022.

Some of the key drivers identified by CARE Rating are-

Positives

Increased capital outlay towards infrastructure creation by 26% to Rs.5.54 lakh crore
Enhanced outlay of Rs.1,18,101 crore for MoRTH of which Rs. 1,08,230 crore is for capital.
Central Counterpart Funding to various metros aggregating to Rs.88,059 crore
Proposals to further incentivize and boost affordable housing.
Pent up urban demand and continuing rural demand.

Negative

Slow pick up of demand with ongoing Covid II
Increase in input costs
Excess capacities

Concrete

JK Lakshmi Cement Begins Rs 110 Billion Assam Plant Project

The 2.5 MTPA integrated cement plant is expected to be completed by FY2029.

Published

1 hour ago

October 31, 2026

admin

JK Lakshmi Cement has recently laid the foundation stone for Project Kamakshi, its first integrated cement manufacturing facility in Assam, marking its entry into Northeast India. The groundbreaking ceremony was held at Umrangso village in Dima Hasao district in the presence of Assam Chief Minister Himanta Biswa Sarma.

The project involves an investment of Rs 110 billion, including the mining lease, and will have an annual cement production capacity of 2.5 million tonnes, supported by a 1 million tonne clinkerisation unit. Scheduled for completion by FY2029, the facility is expected to generate employment for over 2,000 people while catering primarily to the growing Northeast market.

The integrated plant will feature dedicated railway sidings to facilitate efficient transportation of raw materials and finished cement, strengthening supply chain reliability and regional distribution.

Vinita Singhania, Chairperson and Managing Director, JK Lakshmi Cement, said, “”Project Kamakshi is the start of a long-term relationship with Assam and the wider North East. This is a region that is building fast, and it deserves quality cement made close to home. With this plant, we want to bring scale, jobs, and dependable supply to the region. At JK Lakshmi Cement, we believe that building a stronger India goes beyond infrastructure. It is also about growing together with the communities we serve.””

The investment aligns with the company’s strategy to expand into high-growth markets beyond its established presence in Northern, Western and Eastern India. The project is also expected to support regional economic development and infrastructure growth.

JK Lakshmi Cement aims to pursue its expansion plans while working towards its long-term target of achieving net-zero emissions by 2047.

Concrete

JK Lakshmi Cement to Expand EV Fleet to 120 Vehicles by March 2027

JK Lakshmi Cement has deployed more than 70 EVs across its logistics network.

Published

1 day ago

October 30, 2026

admin

JK Lakshmi Cement has deployed more than 70 electric vehicles (EVs) across its logistics network and plans to increase the fleet to 120 vehicles by March 2027. The expansion is part of its decarbonisation strategy, which aims to reduce transport-related emissions and improve operational efficiency.

The company has achieved nearly 100 per cent EV-based clinker dispatches from its Sirohi plant in Rajasthan to the Kalol Grinding Unit in Gujarat. The transition marks an increased use of electric mobility for long-haul cement transportation and is intended to lower the environmental impact of logistics operations.

The existing fleet operates on routes connecting the Sirohi plant with the Kalol Grinding Unit, Palanpur Unit and Surat Grinding Unit. JK Lakshmi Cement is working with electric vehicle logistics providers SwitchLabs and Billion E to support fleet deployment and manage transportation requirements across these routes.

The company expects the planned expansion to increase the use of electric mobility throughout its logistics network for moving cement and clinker. Chairperson and Managing Director Vinita Singhania said the programme reflected the integration of sustainable practices with the company’s focus on long-term business efficiency, while describing the Sirohi–Kalol transition as an important step in its wider decarbonisation strategy.

The EV programme forms part of JK Lakshmi Cement’s green logistics and sustainability roadmap, alongside initiatives to improve efficiency and reduce emissions across its value chain. The company has set a long-term target of achieving net-zero emissions by 2047. It is part of the JK Organisation and operates integrated cement plants in Rajasthan and Chhattisgarh, along with grinding units in Gujarat, Haryana and Odisha. The company has an annual turnover of more than Rs. 60 bn, combined cement capacity of approximately 18 mn t per annum and a target to raise capacity to 30 mn t by 2030. Its portfolio includes ready-mix concrete, gypsum plaster, wall putty, primer, adhesives and fly ash blocks.

Concrete

Martin Engineering Appoints Ashwini Khunte as India General Manager

Published

1 day ago

October 30, 2026

admin

Martin Engineering names Ashwini Khunte India General Manager to strengthen operations and drive growth across key bulk material handling sectors.

Pune

Martin Engineering, a global provider of bulk material handling solutions, has appointed Ashwini Khunte as General Manager of its India business, strengthening its leadership as the company expands its presence across the country’s cement, mining, steel, power and infrastructure sectors.

Khunte brings more than a decade of experience with Martin Engineering, having joined its Indian operations in 2013 as a Design Engineer, shortly after the company established its presence in the country in 2012.

A mechanical engineer by qualification, she spent her initial five years developing bulk material handling solutions in collaboration with the company’s operations team. During this period, she gained extensive experience addressing operational challenges in the steel, cement and coal industries. She subsequently moved into project engineering, managing major engineering, procurement and construction (EPC) and original equipment manufacturer (OEM) projects from initial enquiry to commissioning. Her responsibilities later expanded to overseeing Martin Engineering’s conveyor product portfolio in India, involving customer engagement, technical presentations and site visits across heavy industries.

In 2024, Khunte was promoted to Head of Sales & Marketing for the company’s Europe, Middle East, Africa and India (EMEAI) region. The position broadened her international market exposure and strengthened her strategic and commercial leadership capabilities.

Commenting on her appointment, Ashwini Khunte, General Manager, Martin Engineering India, said: “India represents a tremendous opportunity for Martin Engineering. The country’s continued investment in cement, mining, steel, power and infrastructure is creating increasing demand for safer, cleaner and more productive bulk material handling, and that’s exactly what we do. My priority will be to build on the strong foundations already established in India, while continuing to develop our people, strengthen customer relationships and bring practical solutions to the challenges faced by our industry.”

Robert Whetstone, Area Vice President – EMEAI, Martin Engineering, highlighted Khunte’s technical expertise, market understanding and leadership experience.

“Ashwini brings an exceptional combination of technical understanding, customer knowledge and commercial leadership. She has grown as Martin Engineering has grown, and has consistently demonstrated outstanding capability to transform her expertise into practical solutions. Her knowledge of the Indian market, together with her international experience, makes her ideally suited to lead our India business through its next stage of growth for years to come.”

Since establishing its Indian business in 2012, Martin Engineering has expanded its local workforce, manufacturing capabilities and dealership network. The company supplies conveyor products, transfer point solutions, material flow aids, training and technical support to bulk material handling industries. Khunte’s appointment positions the company to further strengthen customer relationships and expand its solutions portfolio in India’s growing industrial and infrastructure markets.