Concrete

L&T 3D print tech to revolutionise building construction

Published

4 years ago

July 1, 2021

admin

Larsen &Toubro, announced having successfully 3D printed a G+1 (Ground plus one) Building with reinforcement for the first time in India. With the country aggressively pursuing the objective of creating 60 million houses under the Housing for All by 2022 programme, this achievement will certainly give a huge fillip for the mass housing segment.

??D concrete printing is one of the technology disruptors with the potential to radically redefine construction methodologies and I am extremely happy that by demonstrating our growing expertise in 3D printing, we are well positioned to push the boundaries of automated robotic construction,??said MV Satish, Whole Time Director & Senior Executive Vice President (Buildings).

??D printing will not only accelerate the pace of construction but also significantly improve build quality,??he added. L&T has 3D printed a Ground + 1 building of 700 sq feet built up area at their Kanchipuram facility with a special, in-house developed concrete mix using indigenously available regular construction materials. The building was printed with both vertical reinforcement bar and horizontal distributors using welded mesh that satisfy provisions in the Indian Codes and optimise the cost of construction. Except for the horizontal slab members, the entire building structure was 3D printed ??ast in Situ??at the job site in an ??pen to sky??environment within 106 printing hours, using a fully automated 3D printer.

Three-dimensional printing is a process, in which the material is printed under computer control to build a 3-dimensional product, typically layer by layer. It is predominantly used in manufacturing industries to print rapid prototypes, complex shapes and small batch production using special polymers, metal alloys, etc. Three-dimensional printing with concrete is still largely work in progress across the globe.

Earlier in November 2019, the team had 3D printed 240 sq feet 1 BHK, in line with typical EWS building layout, to explore the feasibility of this innovative technology.

Larsen &Toubro is an Indian multinational engaged in engineering, procurement and construction projects, manufacturing, defence and services with over $21 billion in revenue. It operates in over 30 countries worldwide.

Concrete

Berger Paints Announces Financial Results for the Quarter Ended

Net Profit for the quarter was Rs 2.06 billion, compared to Rs 2.69 billion in the corresponding quarter of the previous year.

Published

5 hours ago

November 5, 2025

admin

Berger Paints India announced its financial results for the quarter ended September 30, 2025.

The company reported Revenue from Operations of Rs 28.27 billion, compared to Rs 27.74 billion in the corresponding quarter last year, reflecting a growth of 1.9 per cent year-on-year.

EBITDA (excluding other income) stood at Rs 3.52 billion, as against Rs 4.34 billion in the same period last year, registering a decline of 18.9 per cent.

Net Profit for the quarter was Rs 2.06 billion, compared to Rs 2.69 billion in the corresponding quarter of the previous year, marking a decline of 23.5 per cent year-on-year.

Commenting on the performance, Abhijit Roy, Managing Director & CEO, Berger Paints India, said, “At Berger Paints, we remain committed to driving growth through network expansion, innovation, and brand building. Our focus continues to be on delivering long-term value for our investors and stakeholders.”

Concrete

Ambuja Cements posts record Q2, lifts FY28 capacity target

PAT rises to Rs 23.02 bn; volumes up 20%; margin widens 450 bps

Published

5 hours ago

November 5, 2025

admin

Ahmedabad, recently — Ambuja Cements, part of the Adani Portfolio, reported a strong Q2 FY26 performance with consolidated PAT of Rs 23.02 billion (up 364 per cent year on year), highest-ever Q2 sales volume of 16.6 million tonnes (up 20 per cent) and revenue of Rs 91.74 billion (up 21 per cent). EBITDA rose to Rs 17.61 billion with a margin of 19.2 per cent, while EBITDA per tonne reached Rs 1,060 (up 32 per cent). EPS stood at Rs 7.2 (up 267 per cent). The PAT figure includes an income-tax provision reversal of Rs 16.97 billion.

The company raised its FY28 capacity goal by 15 MTPA to 155 MTPA, largely through low-capex debottlenecking at about USD 48 per tonne. Thirteen new blenders are being installed to optimise product mix and lift the share of premium cement, and logistics debottlenecking is expected to add around three per cent utilisation to the existing 107 MTPA base over 24 months.

On projects, a 4 MTPA kiln at Bhatapara has begun trial runs, the 2 MTPA Krishnapatnam grinding unit has been operationalised, and an additional 7 MTPA across three locations is slated for Q3. Renewable power capacity reached 673 MW after commissioning 200 MW, with targets of 900 MW by year-end and 1,122 MW by FY27.

Cost discipline continued: kiln fuel, power and logistics costs declined year on year; green power share of consumption rose to 32.9 per cent; and logistics cost stood at Rs 1,224 per tonne. Management reiterated end-FY26 total cost guidance of about Rs 4,000 per tonne and a pathway to Rs 3,650 per tonne by FY28, supported by higher coal share, newer assets, shorter lead distances (including a growing sea-logistics share), and long-term fly ash/slag tie-ups.

Strategically, Ambuja launched CiNOC (Cement Intelligent Network Operations Centre) to embed AI across sales, production and logistics; deepened engagements with CONCOR, CREDAI and 400+ academic partners; and ordered seven vessels totalling 65,800 DWT to lift coastal movement to five per cent. The company remains debt-free with net worth of Rs 694.93 billion and the highest Crisil ratings (AAA/Stable; A1+).

Concrete

India, EU Resume Talks To Finalise Free Trade Agreement

High-level negotiators meet in Delhi to push balanced trade deal

Published

1 day ago

November 4, 2025

admin

A senior delegation from the European Union (EU) is in New Delhi from 3 to 7 November 2025 to hold detailed discussions with Indian counterparts on the proposed India–EU Free Trade Agreement (FTA). The negotiations aim to resolve key pending issues and move closer to a comprehensive, balanced, and mutually beneficial trade framework.

The visit follows Union Minister of Commerce and Industry Piyush Goyal’s official trip to Brussels on 27–28 October 2025, during which he held forward-looking talks with European Commissioner for Trade and Economic Security Maroš Šef?ovi?. Both sides reaffirmed their commitment to intensify dialogue and strengthen cooperation towards finalising the FTA.

This week’s deliberations will focus on trade in goods and services, rules of origin, and technical and institutional matters, guided by the shared goal of creating a modern and future-ready trade pact that reflects the priorities and sensitivities of both India and the EU.

The discussions gained further momentum after a virtual meeting on 3 November 2025 between Minister Piyush Goyal, Commissioner Maroš Šef?ovi?, and EU Commissioner for Agriculture and Food Christophe Hansen, which helped align positions on key areas of mutual interest.

As part of the ongoing negotiations, Ms. Sabine Weyand, Director-General for Trade at the European Commission (EU DG Trade), will visit New Delhi on 5–6 November for high-level consultations with India’s Commerce Secretary Rajesh Aggarwal. The talks will address technical and policy matters critical to concluding the agreement.

The EU delegation’s visit underscores the shared determination of India and the European Union to conclude a fair, transparent, and equitable FTA, aimed at boosting trade, investment, innovation, and sustainable economic growth.

Both sides view the FTA as a strategic pillar in their partnership, capable of enhancing market access, creating new opportunities for businesses, and promoting a resilient and diversified global supply chain.