Connect with us

Concrete

SPECTRAFLOW, now in India

Published

on

Shares

Cross belt analysers have been gaining popularity over years especially for the raw material analysis that goes for raw meal preparations. This leads to consistency of raw meal before clinkerisation takes place.

Ramco Cements, an independent Indian group, ordered a Crossbelt and Airslide analyzer from SpectraFlow analytics, for their new integrated plant at Kalvatala, to optimize the stability of their raw meal.

Ramco Cements Limited, founded in 1961, is a reputed cement manufacturer in India, headquartered in Chennai. Ramco Cements produces superior quality cement at their state-of-the art facilities including integrated cement plants and grinding units. The company is the fifth largest cement manufacturer in India and also produces Ready Mix Concrete and Dry Mortar products and operates one of the largest wind farms in the country.

About Ramco Cements Limited, Kalvatala plant:

Greenfield integrated cement plant is being setup at Kalvatala, Kolimigundla Mandal, Kurnool District. The foundation stone was laid in December 2018 and the plant shall be operational in first quarter of 2021. The project will include a Waste Heat Recovery System and a Thermal Power Plant.

FLS was chosen as the main equipment supplier and Ramco Project Team looked after specialized components themselves and choose SpectraFlow Analytics Crossbelt Analyzer for their stockpile and pre-blending management and SpectraFlow Airslide Analyzer for the raw meal optimization of their two raw mills.

SpectraFlow Installation for Quarry/Stockpile Optimization:

The SpectraFlow Crossbelt Analyzer is the online analyzer to be able to measure raw materials on belt conveyors. As raw materials from the quarry are processed through a crusher the raw material on the conveyor belt is statistically homogeneous and therefore the analytical results of the SpectraFlow Crossbelt Analyzer are accurate.

By using SpectraFlow Crossbelt analyzer and a site specific blending strategy at Kavalatala the high variation in the local raw materials shall be balanced out to increase consistency of the stockpile quality.

Summarized benefits are:

– No need of sampling. Sampling from conveyor belts is unrepresentative and slow for process optimization. Additionally, sampling is very work intensive regarding operation and maintenance.

– The analyzer together with a Pre-Blending control software from RAMCO SYSTEMS is fully automating the feed from the hoppers. The analyzer delivers the analytical results and according the setpoint the software is adjusting the feeders into the mixing stage

– The analyzer together with a Pre-Blending control software is informing the quarry/crusher operators of the current composition of the stockpile and accordingly the trucks can be coordinated to reach the setpoint of the stockpile.

– Stockpile quality will be homogeneous and on setpoint. That results in stable and low additive consumption at the raw mill.

– Stable feed from the stockpile leads to stable raw mill operation and fine raw meal/clinker quality.

SpectraFlow Installation for Raw Mill Optimization:

The SpectraFlow Airslide Analyzer is the online analyzer to be able to measure raw materials in airslides. As raw materials in airslides are very homogeneous and dry the analytical results of the SpectraFlow Airslide Analyzer are very accurate and based on these accurate results the raw mix control software can optimize the weight feeders before the raw mill in real time every minute. This results in very low LSF STDEV without the need of extensive sampling and laboratory efforts.

Kalvatala operates 2 Roller Press raw. The raw meal will feed to a joint airslide where the SpectraFlow Airslide analyzer will measure.

For the control of the weight feeders at the 2 raw mills Ramco will use control software from RAMCO SYSTEMS.

By using SpectraFlow an increase in the raw meal homogeneity will be achieved.

Summarized benefits are:

– Two raw mills can be controlled by one online analyzer.

– No need of intensive sampling. No automated sample transport system, no automated laboratory required.

– High cost reduction due to reduced laboratory usage (CAPEX, OPEX, man power,??

– The analyzer together with the control software is fully automating the raw material grinding. The analyzer delivers the analytical results and according the setpoint the software is adjusting the weight feeders of the additive bins.

– Adjustment of the weight feeders in real time every minute. No time delay due to sampling, sample preparation, ??/p>

– Lower LSF STDEV/better and more consistent raw mill quality


RAMCO SYSTEMS

SpectraFlow order

This SpectraFlow order is the 39th order for the Cement Industry and the 1st installation in India. This order raises the installed based in India to 2 analyzers (1 Crossbelt & 1 Airslide) and worldwide to 56 analyzers (31 Crossbelt & 25 Airslide).

SpectraFlow Analytics Ltd. Switzerland are the experts in providing online analysis for the cement and minerals industry without any radioactive sources nor neutron generators. The NIR technology used for the SpectraFlow Analyzers is not requiring any permits or licenses and there are no restrictions in buying, importing or maintaining the analyzers. This results in very low operating costs and high availability of the analyzers combined with highly accurate measurement results.

For further information, contact: Vijay Kumar Vemuri, Managing Partner, SPV Engineers, 2242, BHEL MIG,

Phase-I, Serilingampally, Hyderabad – 502032

M no. +91 8885744161, Email:vk.vemuri@spvengineers.com

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Concrete

Cement Makers’ Margins To Fall Rs 50-75 Per Tonne Amid West Asia Conflict

Crisil Sees Margins Easing Despite Steady Demand

Published

on

By

Shares

Crisil said operating margins of Indian cement manufacturers are expected to decline by Rs 50-75 per tonne (t) this fiscal to Rs 925-950 per t due to higher input costs triggered by the West Asia conflict. The analysis covered 18 cement companies accounting for nearly 90 per cent of India’s domestic cement capacity and noted margins had improved sharply to around Rs 1,000 per t in fiscal 2026.

Crisil noted that the reduction would be driven mainly by higher power and fuel costs, which account for about 30 per cent of total costs, as petcoke and imported coal prices have surged amid geopolitical uncertainties. Freight costs, which account for about a quarter of total costs, are also expected to remain elevated because of higher diesel prices. The impact on profitability is likely to be more pronounced in the first half of the fiscal year before easing commodity prices moderate cost pressures later.

The rating agency said steady domestic demand and strong balance sheets should keep credit profiles stable despite the moderation in margins. Green energy currently accounts for 35-40 per cent of the sector’s total electricity consumption and is expected to partly cushion higher energy costs. Operating cash flows are likely to remain resilient, supported by projected 6-7 per cent growth in cement demand this fiscal.

Crisil highlighted that demand growth will be driven primarily by infrastructure spending, which meets about one-third of sector consumption, and by a nearly 18 per cent higher budgetary allocation for core ministries that should support project execution. Weaker rural housing demand amid pressure on agricultural incomes from a possible below-average monsoon may be offset by improved urban housing demand supported by favourable home-loan rates and a strong pipeline of Pradhan Mantri Awas Yojana-Urban projects. Ongoing capacity additions will keep capital expenditure elevated and may lift net debt to EBITDA to between 1.2 and 1.4 times from around 1.0 time last fiscal, though ratios are expected to remain healthy.

Continue Reading

Concrete

UltraTech Board Approves Rs 50 bn Fundraise Via NCDs

Company to issue half a million debentures for expansion plan

Published

on

By

Shares

UltraTech Cement’s board of directors has approved raising Rs 5,000 crore (Rs 50 bn) through non?convertible debentures issued in rupees.

The finance committee cleared a proposal to issue up to 500,000 fully paid, unsecured, listed, rated, redeemable, rupee?denominated, non?convertible, non?cumulative debentures of Rs 1 lakh each (Rs 0.1 mn each), aggregating to the Rs 5,000 crore programme.

As of June 2026 the firm reported net debt of Rs 15,875 crore (Rs 158.75 bn) and said its capacity expansion projects under execution are backed by capital expenditure of about Rs 17,000 crore (Rs 170 bn) over the next two to two?and?a?half years.

UltraTech spent Rs 9,500 crore (Rs 95 bn) on capital expenditure in financial year 2026 and in April the group crossed 200.1 mn tonnes per annum of domestic grey cement capacity and 205.5 mn tonnes per annum of global capacity.

The chief financial officer indicated the company would take consolidated capacity beyond 242 mn tonnes per annum, with grey cement capacity reaching 212.7 mn tonnes per annum by the end of financial year 2027. He noted the net debt?to?earnings before interest, taxes, depreciation and amortisation ratio stood at 0.87 times as of June 2026 and the company was confident of ending financial year 2027 with the ratio below one time.

In the first quarter of financial year 2026?27 UltraTech’s net profit attributable to owners rose 16.8 per cent year?on?year to Rs 2,599.3 crore (Rs 25.993 bn) and revenue from operations increased 15.9 per cent to Rs 24,648.20 crore (Rs 246.482 bn). The board approval is expected to complement internal cash flows as the company advances its expansion programme.

Continue Reading

Concrete

Lokesh Lays Stone For Rs 31 Billion Cement Unit In Kadapa

Line-2 expansion to make Kadapa a major cement hub

Published

on

By

Shares

Andhra Pradesh Education and IT Minister Nara Lokesh on Wednesday laid the foundation stone for the Line-2 expansion of Dalmia Bharat Cement at Chinnakomerla village in Mylavaram Mandal in Kadapa district. The project carries an investment of Rs 31 billion (bn) and is slated for completion by the third quarter of the financial year 2028. The expansion is intended to boost industrial growth and employment generation across the Rayalaseema region.

Once commissioned, the Kadapa facility will become Dalmia Bharat’s largest integrated cement manufacturing ecosystem in southern India, creating over 1,000 direct and indirect jobs and opening new business avenues for regional micro, small and medium enterprises and transport operators. Lokesh said the expansion signalled growing corporate confidence in the state and reflected the practical ease of doing business that secured repeat investment.

He placed the project within the government’s wider economic targets and recalled the Yuvagalam padayatra commitment to generate two million (mn) jobs within five years, noting that the state would cultivate talent while industry created opportunities. Lokesh highlighted Andhra Pradesh’s competitive pursuit of major manufacturing accounts, mentioning past successes and a personal initiative to engage global investors when persuading them to anchor expansion in the state.

The plant will leverage Kadapa’s abundant limestone reserves to scale production and sustainability. Clinker capacity is planned to rise from two point five million tonnes per annum (mn tpa) to six point one mn tpa, while overall cement output will increase from three point six mn tpa to nine point six mn tpa. The unit is designed to operate on over eighty per cent renewable energy and deploy waste heat recovery, zero liquid discharge, water recycling and advanced AI systems to optimise efficiency. Industries Minister TG Bharat, BC Welfare Minister S. Savitha and Jammalamadugu MLA C. Adinarayana Reddy attended the ceremony.

Continue Reading

Video Thumbnail

    SIGN-UP FOR OUR GENERAL NEWSLETTER


    Trending News

    SUBSCRIBE TO THE NEWSLETTER

     

    Don't miss out on valuable insights and opportunities to connect with like minded professionals.

     


      This will close in 0 seconds