Technology

Safe & effective cleaning system at RMC plants

Published

11 years ago

January 31, 2015

admin

The Grundfos CM 1-11 pump has been successfully underwent trial for the task of cleaning RMC vessel safely and quickly.
Lafarge Aggregates & Concrete recently acquired a pump from Grundfoss. The task was to clean the ready-mix concrete (RMC) vessel safely and quickly.
Concrete by nature will solidify and leaves deposition on the walls of mixing unit as well as its agitator blades during mixing operation. This deposition is progressive and needs to be removed every day, at the end of the work before starting the next batch. This, other wise would overload the agitator motor which in turn affects the speed of the agitator and thus the mixing of concrete.

The conventional system was to engage labour to chip out the deposited concrete from the vessel every day at the end of production so that vessel can be kept ready for the concrete production next day. This method was unsafe and ineffective apart being laborious.

When the customer approached with this unique issue, Grundfos immediately got into action to provide an effective solution associating itself with water jet gun supplier and proposed to conduct a trial at one of the sites to evaluate the results and then to convince the customer.

The solution
Grundfos conducted trial with a pump which was readily available in stock. A CM 1-11 model was chosen and bought a pressure hose and coordinated with spray gun supplier to provide his product for the trial to be conducted. An RMC unit in Bengaluru was identified for the trial and mobilised all materials at site and successful trial was conducted which was acknowledged by the local officials in the RMC.

The system was temporarily installed near the RMC unit and demonstration was conducted. Later, another demonstration was conducted at Lafarge?sone of sites in Mumbai which was acknowledged to be successful.

The solution apart being
effective was also safe in terms of operation and eliminated the laborious task that was previously involved. After this successful demo, the customer ordered out a system for continuous use in their Mumbai site which was executed through Grundfos? Mumbai distributor.

However, the pump model was changed to CR 1-19 which was found suitable for the application and permanent installation at site.

How it works
The high pressure pump connected with hydraulic hose pipe and the spray gun at the discharge end, draws water from the nearby source and an operator can hand hold the spray gun and safely operate it for removal of the concrete deposition without entering into the mixing unit. Pressure of 10-12 bar has been found to be effective in removing the concrete deposition.

The outcome
Earlier, the customer had used an imported high pressure cleaning system which was unsafe in terms of operation as it was producing 200 bar and was difficult to handled by the operators. The manually chipping out the deposition was found to be quite laborious and ineffective. They were looking for a system which will be safe as well as effective which this system proved to be.

Pump specifications
Model: CR 1-19
Motor: 0.55 kW
Pressure head: 11 bar
Flow: 1 cu m/hr

Technology

ARAPL Reports 175% EBITDA Growth, Expands Global Robotics Footprint

Affordable Robotic & Automation posts strong Q2 and H1 FY26 results driven by innovation and overseas orders

Published

3 weeks ago

October 15, 2025

admin

Affordable Robotic & Automation Limited (ARAPL), India’s first listed robotics firm and a pioneer in industrial automation and smart robotic solutions, has reported robust financial results for the second quarter and half year ended September 30, 2025.
The company achieved a 175 per cent year-on-year rise in standalone EBITDA and strong revenue growth across its automation and robotics segments. The Board of Directors approved the unaudited financial results on October 10, 2025.

Key Highlights – Q2 FY2026
• Strong momentum across core automation and robotics divisions
• Secured the first order for the Atlas AC2000, an autonomous truck loading and unloading forklift, from a leading US logistics player
• Rebranded its RaaS product line as Humro (Human + Robot), symbolising collaborative automation between people and machines
• Expanded its Humro range in global warehouse automation markets
• Continued investment in deep-tech innovations, including AI-based route optimisation, autonomy kits, vehicle controllers, and digital twins
Global Milestone: First Atlas AC2000 Order in the US

ARAPL’s US-based subsidiary, ARAPL RaaS (Humro), received its first order for the next-generation Atlas AC2000 autonomous forklift from a leading logistics company. Following successful prototype trials, the client placed an order for two robots valued at Rs 36 million under a three-year lease. The project opens opportunities for scaling up to 15–16 robots per site across 15 US warehouses within two years.
The product addresses an untapped market of 10 million loading docks across 21,000 warehouses in the US, positioning ARAPL for exponential growth.

Financial Performance – Q2 FY2026 (Standalone)
Net Revenue: Rs 25.7587 million, up 37 per cent quarter-on-quarter
EBITDA: Rs 5.9632 million, up 396 per cent QoQ
Profit Before Tax: Rs 4.3808 million, compared to a Rs 360.46 lakh loss in Q1
Profit After Tax: Rs 4.1854 lakh, representing 216 per cent QoQ growth
On a half-year basis, ARAPL reported a 175 per cent rise in EBITDA and returned to profitability with Rs 58.08 lakh PAT, highlighting strong operational efficiency and improved contribution from core businesses.
Consolidated Performance – Q2 FY2026
Net Revenue: Rs 29.566 million, up 57% QoQ
EBITDA: Rs 6.2608 million, up 418 per cent QoQ
Profit After Tax: Rs 4.5672 million, marking a 224 per cent QoQ improvement

Milind Padole, Managing Director, ARAPL said, “Our Q2 results reflect the success of our innovation-led growth strategy and the growing global confidence in ARAPL’s technology. The Atlas AC2000 order marks a defining milestone that validates our engineering strength and accelerates our global expansion. With a healthy order book and continued investment in AI and autonomous systems, ARAPL is positioned to lead the next phase of intelligent industrial transformation.”
Founded in 2005 and headquartered in Pune, Affordable Robotic & Automation Ltd (ARAPL) delivers turnkey robotic and automation solutions across automotive, general manufacturing, and government sectors. Its offerings include robotic welding, automated inspection, assembly automation, automated parking systems, and autonomous driverless forklifts.
ARAPL operates five advanced plants in Pune spanning 350,000 sq ft, supported by over 400 engineers in India and seven team members in the US. The company also maintains facilities in North Carolina and California, and service centres in Faridabad, Mumbai, and San Francisco.

Technology

M.E. Energy Bags Rs 490 Mn Order for Waste Heat Recovery Project

Second major EPC contract from Ferro Alloys sector strengthens company’s growth

Published

3 weeks ago

October 15, 2025

admin

M.E. Energy Pvt Ltd, a wholly owned subsidiary of Kilburn Engineering Ltd and a leading Indian engineering company specialising in energy recovery and cost reduction, has secured its second consecutive major order worth Rs 490 million in the Ferro Alloys sector. The order covers the Engineering, Procurement and Construction (EPC) of a 12 MW Waste Heat Recovery Based Power Plant (WHRPP).

This repeat order underscores the Ferro Alloys industry’s confidence in M.E. Energy’s expertise in delivering efficient and sustainable energy solutions for high-temperature process industries. The project aims to enhance energy efficiency and reduce carbon emissions by converting waste heat into clean power.

“Securing another project in the Ferro Alloys segment reinforces our strong technical credibility. It’s a proud moment as we continue helping our clients achieve sustainability and cost efficiency through innovative waste heat recovery systems,” said K. Vijaysanker Kartha, Managing Director, M.E. Energy Pvt Ltd.

“M.E. Energy’s expansion into sectors such as cement and ferro alloys is yielding solid results. We remain confident of sustained success as we deepen our presence in steel and carbon black industries. These achievements reaffirm our focus on innovation, technology, and energy efficiency,” added Amritanshu Khaitan, Director, Kilburn Engineering Ltd

With this latest order, M.E. Energy has already surpassed its total external order bookings from the previous financial year, recording Rs 138 crore so far in FY26. The company anticipates further growth in the second half, supported by a robust project pipeline and the rising adoption of waste heat recovery technologies across industries.

The development marks continued momentum towards FY27, strengthening M.E. Energy’s position as a leading player in industrial energy optimisation.

Technology

NTPC Green Energy Partners with Japan’s ENEOS for Green Fuel Exports

NGEL signs MoU with ENEOS to supply green methanol and hydrogen derivatives

Published

3 weeks ago

October 15, 2025

admin

NTPC Green Energy Limited (NGEL), a subsidiary of NTPC Limited, has signed a Memorandum of Understanding (MoU) with Japan’s ENEOS Corporation to explore a potential agreement for the supply of green methanol and hydrogen derivative products.

The MoU was exchanged on 10 October 2025 during the World Expo 2025 in Osaka, Japan. It marks a major step towards global collaboration in clean energy and decarbonisation.
The partnership centres on NGEL’s upcoming Green Hydrogen Hub at Pudimadaka in Andhra Pradesh. Spread across 1,200 acres, the integrated facility is being developed for large-scale green chemical production and exports.

By aligning ENEOS’s demand for hydrogen derivatives with NGEL’s renewable energy initiatives, the collaboration aims to accelerate low-carbon energy transitions. It also supports NGEL’s target of achieving a 60 GW renewable energy portfolio by 2032, reinforcing its commitment to India’s green energy ambitions and the global net-zero agenda.