Concrete
Themes of Sustainable Development
Published
3 years agoon
By
admin
Asok Kr. Dikshit, Richa Mazumder, Sanjeev Kr. Chaturvedi and Lok Pratap Singh, National Council for Cement and Building Materials (NCCBM), discuss the various tenets that are critical for sustainable development of India’s cement sector, in the first piece of a
three-part series.
India is the second largest producer of cement in the world and accounts for approximately 8 per cent of global cement production (WBCSD 2019). The cement production in India will reach 1.360 billion tonnes annually by 2050 as estimated by the Cement Manufacturers Association (CMA) (WBCSD 2019). The Indian cement sector is the fifth-largest contributor to India’s economy and plays a fundamental role in the socio-economic growth of the nation as it directly provides essential support to the economy, employment and infrastructural development (Dasgupta and Das 2021).
As per the WBCSD report (2019), four themes that are most critical towards India’s sustainable development in the cement sector are: i) energy and climate; ii) people and communities; iii) circular economy; and iv) natural resource management (Fig 1). The Indian cement sector is already facing sustainability issues due to a number of factors like energy and water consumption, material and resource management, reduction in GHG emissions, waste management etc. The viable solutions are energy efficiency, green power generation, reducing reliance on depleting fossil fuels and using alternative fuels and raw materials, enabling water conservation, environment biodiversity protection, reduction in CO2 emissions, setting targets of sustainability for future, etc.
India has made the pledge to cut the CO2 emissions in the COP26 summit at Glasgow, UK, on the new climate action targets ‘Panchamrit’ as below: (i) A net zero target for India by the year 2070; (ii) installing non fossil fuel electricity of 500 GW by 2030; (iii) sourcing 50 per cent of energy requirement from renewables by 2030; (iv) reducing one billion tonnes of projected emission from now till 2030 and achieving carbon intensity reduction of 45 per cent over 2005 levels by 2030.
The first theme i.e., energy and climate include the impact opportunities in the form of low-carbon transportation and logistics, resilient and sustainable built environment and energy efficiency and use of clean energy. The second theme, people and communities include skills enhancement, enhance diversity and inclusiveness and transport safety. The third theme which is circular economy mostly concentrates on using waste as resource and the fourth theme is natural resource management in terms of limestone, fuel, water, biodiversity etc. In this paper, the R&D work carried out in NCB under these themes has been discussed in detail.

ENERGY AND CLIMATE
For sustainable cement production one of the key aspects is energy efficiency. To optimise processes and minimise energy consumption the cement sector has been actively investing in energy-efficient technologies. Cement production requires electrical energy at several stages, from crushing of raw materials over clinker production and cement grinding. In a cement plant, power for different operations is typically distributed as follows: 5 per cent for raw material extraction and blending, 24 per cent for raw material grinding, 6 per cent for raw material homogenisation, 22 per cent for clinker production, 38 per cent for cement production, 5 per cent for conveying, packing and loading (refer Fig 2).

As per Xu et al (2013) the savings from reduced use of coal are in general less cost effective compared to electricity savings, mainly due to much lower coal price. Morrow et al (2014) substantiates that for the Indian cement sector, the largest potential in electricity saving is from low temperature WHR power generation, which saves purchased electricity by generating electricity from the waste heat onsite and replacing a ball mill with a vertical roller mill in finish grinding. As per the CMA’s estimates, the WHR potential of the Indian cement sector is more than double the currently installed capacity (WBCSD 2019).
To capture and utilise excess heat, upgradation of kilns and equipment, preheaters, cogeneration, optimising production processes and waste heat recovery systems are being deployed in plants so that less energy is needed to produce cement. These help in significantly reducing the energy consumption and associated greenhouse gas emissions. This will not only lead to reducing greenhouse gas emissions but also contribute to the overall energy efficiency of the plant. By improving energy efficiency and using renewable energy sources, the industry can reduce its dependence on fossil fuels and lower its operating costs.
To address the barriers to energy efficiency within the industrial sector, the Indian Bureau of Energy Efficiency (BEE) has implemented the Performance, Achieve and Trade (PAT) scheme. It focuses on incentivising energy efficiency in the industrial sector which also includes the cement sector. The selected facilities or the Designated Consumers – DC represent the highest energy consumers within each of the selected sectors. They have their own assigned target for energy consumption (Marinelli 2022). This target is defined as a percentage reduction from the corresponding baseline and depends on the best per- forming plant within the sector on a proportional basis. Indian Bureau of Energy Efficiency would issue Energy Saving Certificates (ESCerts) to Designated Consumers on achievement of the targets established, based on respective savings. Designated Consumers that do not meet the targets will be required to either buy Energy Saving Certificates from entities that over achieve the targets and are issued excess certificates or pay penalties. The Energy Saving Certificates will be tradable and bankable in a market between the Designated Consumers, with their price being determined by the market. In its first cycle (2012–2015), PAT has mandated an energy reduction of 6.86 million metric tonnes of oil equivalent (Bhandari and Shrimali 2018).
It is evident that the cement industry is an energy intensive industry and is predominantly reliant on conventional fuels and responsible for 6 to 9 per cent of global CO2 emissions due to which it has a huge impact on the environment. It has been estimated that out of the total CO2 emission caused due to anthropogenic activity, approximately 5 per cent is caused by the cement sector worldwide. These emissions are released in the course of activities like clinker production, fuel consumption in cement kilns, use of coal in captive power plants and supply chain operations. Apart from CO2 other GreenHouse Gases (GHGs) like sulphur dioxide and nitrogen dioxide are also amplifying the problem of emissions due to its ill effects like ozone depletion, global warming, acid rain, various health issues, etc. By adopting green technologies and practices, the cement sector not only can reduce its GHG emission but also help in protecting the environment while doing cost optimisation.
Best Available Technology (BAT) is the way on which the Indian Cement industry has always relied to stay most efficient and sustainable. To achieve techno-economic viability and remain ahead, the cement sector is continuously performing R&D on green technology/products at scale. It is well noticeable that to reduce energy as well as process related greenhouse gases emission Indian cement sector has adopted decarbonisation levers as shown in Fig 3.

The study by IEA (2013) predominantly highlights the major levers for both direct and indirect reduction of emissions in the context of the Indian cement sector: (i) the use of fuels such as biomass and alternative materials like industrial or sorted municipal waste (e.g. waste tyres, sewage sludge, animal residue, waste oil, paper residue, plastic, textile), (ii) the substitution of limestone by other blending materials (e.g. slag or fly ash), (iii) the use of state-of-the-art technologies to increase thermal and electrical energy efficiency in cement plants, (iv) and the converting to waste heat recovery (WHR) technologies to convert thermal energy, otherwise lost in cement manufacture, to electricity.
People and Community
NCB has been imparting the required skills for technical manpower for the cement and construction sectors since 1972. NCB’s Continuing Education Services Centre (CCE) with its experienced faculty and modern infrastructural facilities like lecture halls, auditorium, computer centre, hostel, canteen etc., is imparting training on cement, concrete and construction technologies through its various Training Programmes (Short Term courses in Cement and Concrete Technology, Long Term, Simulator Based, Contact and Special Group Training Programmes) to technical professionals of all levels in various organisations in India and abroad. NCB organises customised Special Group Training Programmes giving emphasis on specific topics related to cement and concrete. The training programmes include class room lecture, presentations, laboratory demonstrations and site visits wherever necessary.
NCB organises international seminars on Cement, Concrete and Building Materials biennially since 1987. The 17th NCB International Seminar including the technical exhibition was successfully organised in December 2022 in the series of biennial seminars.

Circular Economy
Circular economy aims towards maximisation of efficiency of resources and minimisation of waste/by-products generated by different industries. Cement industries are actively exploring ways to incorporate industrial waste and by-products as raw materials or fuel substitutes in cement production. This will not only help in reducing the consumption of natural resources (limestone, gypsum etc.) but also diverts waste from landfills and reduces environmental impact. Circularity in cement and concrete industries can be clustered in three technological categories: CO2 emissions, materials and minerals and energy. The cement sector is well positioned to create closed loops or circularity for carbon dioxide, materials, and energy. This necessitates circular economies, which are based on the principles of eliminating waste, by-products, pollution and maximisation of resources. (Fig.4)
Circular Economy in cement sector helps in reducing GHG emissions in cement production because circular technologies follow the paradigm of three crucial decarbonisation strategies: redesign, reduce, and repurpose. (GCCA 2021) To start, addressing the total volume of materials needed or redesigning materials, buildings, and infrastructure can play a critical role. Second step is shifting from fossil to alternative fuels can help reduce emissions from materials. The last step i.e., repurposing, repairing, and refurbishing existing assets and infrastructure will help limit the need for new products by utilising captured carbon dioxide emissions and reinserting them into the value chain.1
Cement industry contribution to circular economy is primarily under two heads i.e. (i) Circular Supply Chain, (ii) Recovery and Recycling. Indian cement industry is playing a key role by enhancing the application of Renewable Energy for electrical power generation. The renewable energy installed capacity (wind and solar) in cement plants increased by more than 40 per cent to 276 MW from 2010 to 2017. Out of the total, 42 MW is solar power, while off-site wind installations account for 234 MW. A company has undertaken the target of switching over to renewable energy for 100 per cent of all electrical energy needs by 2030.2 Big players like UltraTech Cement are targeting 25 per cent share of their total power consumption by green energy technologies by 2021.3
References:
- www.mckinsey.com
- www.wbcsd.org
- www.thehindubusinessline
Concrete
NCL Industries Approves Rs. 5.95 bn Solar-Wind Investment
NCL Industries also receives preliminary approval for an Odisha cement plant.
Published
4 days agoon
November 16, 2026By
admin
NCL Industries has approved an investment of Rs. 5.95 bn for Phase 2 and Phase 3 of its 130 MW solar and wind power project in Tuticorin, Tamil Nadu. The approval covers the remaining 80 MW capacity and takes the estimated cost of the entire project to Rs. 9.87 bn.
The company, which manufactures cement, ready-mix concrete and other building materials, had approved the first phase on April 13, 2026. Phase 1 consists of 50 MW and was estimated to cost Rs. 3.92 bn. The project will be financed through a combination of debt and internal accruals.
Separately, the company’s board has granted in-principle approval to pursue a proposal for establishing a cement manufacturing plant in Odisha. NCL Industries plans to approach the Odisha government for project land and will undertake the applications and approvals required for the proposed facility.
The company said the Odisha project remains at a preliminary stage. No land allotment or definitive agreement has been executed, and it has not made any binding commitment to acquire or lease land as of the date of its disclosure.
Further action on the proposed cement plant will depend on applicable regulatory approvals, as well as the company’s additional evaluation and internal approvals. The board’s decision does not therefore represent a final investment commitment for the Odisha facility.
Shares of NCL Industries closed at Rs. 170.40 on the BSE on November 13, 2026, down Rs. 1.85, or 1.07 per cent, from the previous close. The company’s renewable energy expansion is intended to support its power requirements, while the Odisha proposal would add a new manufacturing project to its cement business if approved at a later stage.
Concrete
Cement Makers See Margin Relief as Oil Prices Lower Fuel Costs
Lower fuel costs and higher prices are set to support cement earnings.
Published
4 days agoon
November 16, 2026By
admin
Cement makers are set to see a significant improvement in profitability in the second half of FY27 as falling global oil prices reduce the cost of key fuels, including petcoke and coal. Higher cement prices are also expected to support earnings, according to a report by Systematix Group.
The cement sector remained resilient in Q2 FY27, with volumes across the companies covered by the brokerage rising 7.2 per cent year-on-year. Higher sales volumes and improved realisations contributed to top-line growth during the quarter, although fuel and packaging expenses remained near-term concerns for manufacturers.
The report said the impact of lower oil prices should gradually appear in fuel costs, though the transmission is likely to be delayed. Petcoke and coal prices generally follow movements in crude oil prices, and the recent decline in global oil prices is expected to provide relief in subsequent quarters rather than immediately.
Cement prices improved towards the end of the second quarter, while price increases implemented during September and October are expected to support realisations in H2 FY27. The combination of stronger selling prices and moderation in energy costs could help offset pressure from fuel and packaging expenses, particularly after the third quarter.
Demand conditions are expected to remain supportive, with infrastructure spending, housing demand and a recovery in construction activity after the monsoon set to drive consumption in the coming months. Demand in eastern markets remained subdued because of prolonged monsoon conditions and flooding, while northern, southern and western markets recorded stronger activity.
The report retained a positive view of the sector, citing resilient demand growth of 8 to 9 per cent, improving pricing discipline and the expected moderation in fuel costs. These factors are expected to support a sharp earnings recovery for cement companies during H2 FY27.
Concrete
ABB Extends Drive Lifespan at ACC Cement Plant Without Production Shutdown
Published
1 week agoon
November 12, 2026By
admin
ABB reconditions 25 drives at ACC’s Jamul cement plant, avoiding 16 tonnes of CO₂ emissions while improving reliability through predictive maintenance.
Chhattisgarh
ABB has signed a multi-year Motion OneCare service agreement with ACC Limited, part of the Adani Group, to modernise ageing industrial drives at its Jamul cement plant in Chhattisgarh, improving operational reliability while avoiding approximately 16 tonnes of carbon dioxide (CO₂) emissions without disrupting production.
Announced on 27 October 2026, the agreement combines scheduled drive reconditioning, digital condition monitoring and energy appraisals to extend equipment lifespan, improve plant uptime and optimise maintenance costs. The initiative marks a shift from conventional equipment replacement towards a more resource-efficient approach to industrial asset management.
The first phase, completed in April 2026, involved the on-site reconditioning of 25 ABB ACS800 variable speed drives without a major plant shutdown. By retaining the existing cabinets and restoring the drive modules rather than replacing entire panels, ABB helped ACC preserve capital investment, minimise material consumption and avoid approximately 16 tonnes of CO₂ emissions.
A second phase, covering an additional 25 ACS800 drive modules, is scheduled for the fourth quarter of 2026. The programme is designed to improve long-term equipment reliability while allowing maintenance activities to be aligned with the plant’s operational schedules.
The ACS800 drives, installed at Jamul in 2010, had delivered more than a decade of near-continuous service in demanding cement manufacturing conditions. However, ageing electrical components and changing fault patterns had begun to affect their ability to meet the plant’s reliability requirements.
Rather than opting for complete equipment replacement, ACC engaged ABB’s certified engineers to conduct a comprehensive asset health assessment. The evaluation found that the existing cabinets and enclosures remained structurally sound, making targeted reconditioning a technically viable and cost-effective alternative to full replacement.
Drawing on nearly two decades of experience with ACC’s equipment and operating requirements, ABB developed a maintenance framework tailored to the plant’s shutdown windows, budget cycles and production priorities.
The Motion OneCare agreement incorporates planned equipment restoration, condition-based monitoring and energy assessments, enabling ACC to adopt a more systematic approach to maintaining critical electrical infrastructure.
As part of the programme, ACC has implemented ABB Ability™ Digital Powertrain Insights to monitor drive performance and identify emerging operational issues before they result in equipment failures.
The digital platform provides continuous visibility into parameters such as temperature, current, vibration and fault patterns. These insights allow maintenance teams to detect early signs of equipment deterioration, schedule interventions more effectively and reduce the likelihood of unexpected downtime.
Amit Gupta, Local Division Manager, Motion Services, ABB India, said: “We know what unchecked wear costs over time: a small inefficiency that eats away at ROI for years. At Jamul, the evidence pointed clearly to assets with productive life still in them.”
“Our job was to restore them properly and give the team the tools to stay ahead of the next problem. At ABB, we don’t just fix what fails. We want to protect what works.”
The initiative also demonstrates the growing relevance of circular economy principles in cement manufacturing, where extending the service life of existing industrial equipment can reduce capital expenditure, material consumption and the environmental impact associated with manufacturing replacement components.
According to ABB, drive reconditioning can reduce lifecycle emissions by 50 to 80 per cent compared with complete equipment replacement. By preserving functional components and restoring critical modules, the process helps retain the economic and material value of existing industrial assets.
The addition of energy appraisals in subsequent phases will further expand the programme beyond equipment restoration, enabling ACC to assess drive performance, identify energy-saving opportunities and improve operating efficiency.
For cement manufacturers, variable speed drives play an important role in controlling motors and optimising energy consumption across production processes. Maintaining their reliability and efficiency is essential for minimising operational disruptions and managing electricity costs.
Vinod Bahety, CEO – Cement Business, Adani Group, said: “Moving from reactive firefighting to a structured maintenance plan was exactly what this operation needed. That kind of peace of mind doesn’t come easily. It comes from a partner that understands how your business runs.”
“We didn’t need a full system overhaul; we needed expert support, actionable insights, and a plan we could execute around our schedule. That’s what we got.”
The project supports ACC’s broader strategy to improve manufacturing efficiency through digital transformation, preventive maintenance and sustainable asset management.
ACC, a subsidiary of Ambuja Cements and part of the Adani Group, operates 20 cement manufacturing facilities and 119 ready-mix concrete plants across India. The company has been advancing initiatives focused on renewable energy, circular economy practices and technology-driven operational improvements.
Alongside Ambuja Cements, ACC is part of a large-scale building materials business committed to achieving net-zero emissions by 2050, with near-term and net-zero targets validated by the Science Based Targets initiative (SBTi).
The Jamul initiative aligns with these sustainability objectives by demonstrating how equipment life extension and digital monitoring can contribute to resource efficiency without requiring large-scale replacement of existing infrastructure.
ABB, a global technology company specialising in electrification and automation, brings more than 140 years of industrial expertise and employs approximately 110,000 people worldwide. Its Motion Services business supports industrial customers through equipment maintenance, modernisation, digital monitoring and lifecycle management solutions.
The agreement also reflects a wider shift in industrial maintenance practices, with manufacturers increasingly adopting predictive technologies to improve equipment availability, manage costs and reduce unplanned shutdowns.
With 25 drives already reconditioned and another 25 scheduled for restoration, ABB’s collaboration with ACC illustrates how targeted modernisation, digital monitoring and circular maintenance practices can extend the operational life of critical equipment while supporting more efficient and sustainable cement production.
NCL Industries Approves Rs. 5.95 bn Solar-Wind Investment
Cement Makers See Margin Relief as Oil Prices Lower Fuel Costs
ABB Extends Drive Lifespan at ACC Cement Plant Without Production Shutdown
ABB Drives Digital Transformation at TCI MAX Cement Plant in J&K
Ramco Cements’ Hard Worker Wins Eight Awards at ‘Love of Advertising Awards 2026’
NCL Industries Approves Rs. 5.95 bn Solar-Wind Investment
Cement Makers See Margin Relief as Oil Prices Lower Fuel Costs
ABB Extends Drive Lifespan at ACC Cement Plant Without Production Shutdown
ABB Drives Digital Transformation at TCI MAX Cement Plant in J&K
Ramco Cements’ Hard Worker Wins Eight Awards at ‘Love of Advertising Awards 2026’
Trending News
-
Concrete4 weeks agoNuvoco reports 13.5% revenue growth in Q2 FY27
-
Concrete4 weeks agoUltraTech Cement Expands in Andhra Pradesh with Rs. 26.5 bn
-
Concrete3 weeks agoCII Calls for Greater Alternative Fuel Use in Cement Industry
-
Concrete2 weeks agoShree Cement Expands Bangur Concrete Network with Patna Plant

