Connect with us

Concrete

Gadkari flags off two cargo vessels from Varanasi

Published

on

Shares

Minister for Shipping, Road Transport and Highways, Nitin Gadkari, has flagged off two vessels viz., MV Joy Basudev (capacity 1,400 tons) and MV VV Giri (capacity 300 tons), containing newly assembled cars of Maruti Suzuki and construction material on 12 August, 2016 from the Aghoreshwar Bhagwan Ram Ghat Varanasi .
On the occasion, Gadkari said that it was his wish that the inland waterways transport system is inaugurated from Varanasi, the constituency of the Prime Minister. The Minister said this transport system will promote jobs to lakhs of people in Uttar Pradesh and will enable 11 power stations in the state to get timely supply of coal. He said this will reduce road traffic congestion and also cost less.

This route between Varanasi and Haldia will also join Allahabad and Kanpur in the future, he added. Gadkari said that inland waterways will be used for transporting passengers and the government was extending this facility to 111 waterways. He also said that three multimodal terminals will be created between Varanasi and Haldia, and the riverbanks will be protected. Gadkari said that Digital Global Positioning System will be installed and dredging will be done to ensure that the river is navigable throughout the year.

National Waterway-1 (NW-1) is being developed under the Jal Marg Vikas Project, with assistance from the World Bank, at an estimated cost of Rs 4,200 crore. The project would enable commercial navigation of vessels with capacity of 1,500-2,000 DWT tonnage from Varanasi to Haldia.

NW-1 is a waterway of national significance passing through Uttar Pradesh, Bihar, Jharkhand and West Bengal, potentially serving the major cities of Haldia, Howrah, Kolkata, Bhagalpur, Patna, Ghazipur, Varanasi, Allahabad and their industrial hinterlands including several industries located along the Ganga basin. The rail and road corridors of this region are already saturated. Hence, the development of NW-1 would result in a viable economical, efficient and eco-friendly mode of transport and huge quantities of cargo can be transported, thereby helping in economic development of this region.

Later, the Minister laid the foundation stone for the multimodal terminal at Ramnagar, Varanasi. Apart from this three road projects (Varanasi-Jamur NH 56; Varanasi-Azamgarh NH 233 and Varanasi- Gazipur NH 29) were also inaugurated. Other road projects linking Varanasi were also approved.

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Concrete

Adani Cement to Deploy World’s First Commercial RDH System

Adani Cement and Coolbrook partner to pilot RDH tech for low-carbon cement.

Published

on

By

Shares
Adani Cement and Coolbrook have announced a landmark agreement to install the world’s first commercial RotoDynamic Heater (RDH) system at Adani’s Boyareddypalli Integrated Cement Plant in Andhra Pradesh. The initiative aims to sharply reduce carbon emissions associated with cement production.
This marks the first industrial-scale deployment of Coolbrook’s RDH technology, which will decarbonise the calcination phase — the most fossil fuel-intensive stage of cement manufacturing. The RDH system will generate clean, electrified heat to dry and improve the efficiency of alternative fuels, reducing dependence on conventional fossil sources.
According to Adani, the installation is expected to eliminate around 60,000 tonnes of carbon emissions annually, with the potential to scale up tenfold as the technology is expanded. The system will be powered entirely by renewable energy sourced from Adani Cement’s own portfolio, demonstrating the feasibility of producing industrial heat without emissions and strengthening India’s position as a hub for clean cement technologies.
The partnership also includes a roadmap to deploy RotoDynamic Technology across additional Adani Cement sites, with at least five more projects planned over the next two years. The first-generation RDH will provide hot gases at approximately 1000°C, enabling more efficient use of alternative fuels.
Adani Cement’s wider sustainability strategy targets raising the share of alternative fuels and resources to 30 per cent and increasing green power use to 60 per cent by FY28. The RDH deployment supports the company’s Science Based Targets initiative (SBTi)-validated commitment to achieve net-zero emissions by 2050.  

Continue Reading

Concrete

Birla Corporation Q2 EBITDA Surges 71%, Net Profit at Rs 90 Crore

Stronger margins and premium cement sales boost quarterly performance.

Published

on

By

Shares
Birla Corporation Limited reported a consolidated EBITDA of Rs 3320 million for the September quarter of FY26, a 71 per cent increase over the same period last year, driven by improved profitability in both its Cement and Jute divisions. The company posted a consolidated net profit of Rs 900 million, reversing a loss of Rs 250 million in the corresponding quarter last year.
Consolidated revenue stood at Rs 22330 million, marking a 13 per cent year-on-year growth as cement sales volumes rose 7 per cent to 4.2 million tonnes. Despite subdued cement demand, weak pricing, and rainfall disruptions, Birla Jute Mills staged a turnaround during the quarter.
Premium cement continued to drive performance, accounting for 60 per cent of total trade sales. The flagship brand Perfect Plus recorded 20 per cent growth, while Unique Plus rose 28 per cent year-on-year. Sales through the trade channel reached 79 per cent, up from 71 per cent a year earlier, while blended cement sales grew 14 per cent, forming 89 per cent of total cement sales. Madhya Pradesh and Rajasthan remained key growth markets with 7–11 per cent volume gains.
EBITDA per tonne improved 54 per cent to Rs 712, with operating margins expanding to 14.7 per cent from 9.8 per cent last year, supported by efficiency gains and cost reduction measures.
Sandip Ghose, Managing Director and CEO, said, “The Company was able to overcome headwinds from multiple directions to deliver a resilient performance, which boosts confidence in the robustness of our strategies.”
The company expects cement demand to strengthen in the December quarter, supported by government infrastructure spending and rural housing demand. Growth is anticipated mainly from northern and western India, while southern and eastern regions are expected to face continued supply pressures.

Continue Reading

Concrete

Ambuja Cements Delivers Strong Q2 FY26 Performance Driven by R&D and Efficiency

Company raises FY28 capacity target to 155 MTPA with focus on cost optimisation and AI integration

Published

on

By

Shares
Ambuja Cements, part of the diversified Adani Portfolio and the world’s ninth-largest building materials solutions company, has reported a robust performance for Q2 FY26. The company’s strong results were driven by market share gains, R&D-led premium cement products, and continued efficiency improvements.
Vinod Bahety, Whole-Time Director and CEO, Ambuja Cements, said, “This quarter has been noteworthy for the cement industry. Despite headwinds from prolonged monsoons, the sector stands to benefit from several favourable developments, including GST 2.0 reforms, the Carbon Credit Trading Scheme (CCTS), and the withdrawal of coal cess. Our capacity expansion is well timed to capitalise on this positive momentum.”
Ambuja has increased its FY28 capacity target by 15 MTPA — from 140 MTPA to 155 MTPA — through debottlenecking initiatives that will come at a lower capital expenditure of USD 48 per metric tonne. The company also plans to enhance utilisation of its existing 107 MTPA capacity by 3 per cent through logistics infrastructure improvements.
To strengthen its product mix, Ambuja will install 13 blenders across its plants over the next 12 months to optimise production and increase the share of premium cement, improving realisations. These operational enhancements have already contributed to a 5 per cent reduction in cost of sales year-on-year, resulting in an EBITDA of Rs 1,060 per metric tonne and a PMT EBITDA of approximately Rs 1,189.
Looking ahead, the company remains optimistic about achieving double-digit revenue growth and maintaining four-digit PMT EBITDA through FY26. Ambuja aims to reduce total cost to Rs 4,000 per metric tonne by the end of FY26 and further by 5 per cent annually to reach Rs 3,650 per metric tonne by FY28.
Bahety added, “Our Cement Intelligent Network Operations Centre (CiNOC) will bring a paradigm shift to our business operations. Artificial Intelligence will run deep within our enterprise, driving efficiency, productivity, and enhanced stakeholder engagement across the value chain.”

Continue Reading

Trending News

SUBSCRIBE TO THE NEWSLETTER

 

Don't miss out on valuable insights and opportunities to connect with like minded professionals.

 


    This will close in 0 seconds