Concrete

Screens, Dust Collectors and Crushers

Published

2 years ago

December 13, 2023

admin

MASYC is an ISO 9001-2008 certified company specialising in bulk material handling system, conveyor equipment, crushers and screens, etc.

Screens – Linear Motion / Circular Motion
The linear as well as circular motion screens are single or multi deck structures with a substantial rigid design. The screen body consists of the two side plates with bolted transverse supports and screen mounts. The screen bar is based on an open design concept. For the linear motion screens, the drive is through direct force exciter with cardon shaft or through unbalanced motors. The angle of throw, which depends on the application, is usually 35-60 degree and is adjusted by counterweights. For the circular motion screens, drive is either direct or through cardon shaft and v-belts.

Baghouse Dust Collectors
For a sustainable and safer environment, ‘Masyc Baghouse Dust Collectors’ are used for various applications in the process plants such as cement, coal, chemicals, thermal power plant, paper and pulp, mining and minerals, steel, sugar and food industries, etc. These work on the principle of pulse jet technology. A powerful shockwave passes through the filter cartridge during cleaning. The dust is discharged from the filter surface and the downwards flowing air allows it to fall into the container.

Non Reversible Hammer Crusher
The Non Reversible Hammer Crushers are manufactured based on proven technology and in house strict quality control. Masyc Non Reversible Hammer Crusher is used for size reduction/crushing. Material is broken first by impact between hammer and material and then by a scrubbing action (attrition) of material against breaker plate. Size reduction starts by impact, when the hammer strikes the material as it enters the crushing zone. Shattered fragments are swept down into final crushing zone for further reduction at the pinch points between the hammers and the breaker plate. This crusher is available with adjustable cages.

Toothed Double Roll Crusher
Masyc Toothed Double Roll Crusher is used for size reduction / crushing and material is crushed by high pressure between two rolls. The crushing starts as soon as material enters the crusher and falls on the toothed segment. High pressure on the circulating crushing tooth segment reduces the material into considerable sizes. Material, while passing through both the toothed double rolls gets crushed into desired size. Toothed double roll crusher produces more uniform produced than any other type of crusher.

Reversible Hammer Crusher
The Reversible Hammer Crushers have the unique design feature such as welded casing, screwed liner with high carbon steel plates, hammer heads made of chrome alloy cast steel or manganese steel depending upon the application. Rotor shaft is made out of forged steel, hammer grinding path with wear resistant plates which are mechanically/hydraulically adjustable and dust proof spherical roller bearing.

Website: www.masycproject.com

(Communication by the management of the company)

Up Next

Indian Cement Industry Set to Build 100-150MT Capacity

Don't Miss

Efficient Processes for a Better Tomorrow

Concrete

Adani Cement to Deploy World’s First Commercial RDH System

Adani Cement and Coolbrook partner to pilot RDH tech for low-carbon cement.

Published

1 day ago

November 14, 2025

admin

Adani Cement and Coolbrook have announced a landmark agreement to install the world’s first commercial RotoDynamic Heater (RDH) system at Adani’s Boyareddypalli Integrated Cement Plant in Andhra Pradesh. The initiative aims to sharply reduce carbon emissions associated with cement production.

This marks the first industrial-scale deployment of Coolbrook’s RDH technology, which will decarbonise the calcination phase — the most fossil fuel-intensive stage of cement manufacturing. The RDH system will generate clean, electrified heat to dry and improve the efficiency of alternative fuels, reducing dependence on conventional fossil sources.

According to Adani, the installation is expected to eliminate around 60,000 tonnes of carbon emissions annually, with the potential to scale up tenfold as the technology is expanded. The system will be powered entirely by renewable energy sourced from Adani Cement’s own portfolio, demonstrating the feasibility of producing industrial heat without emissions and strengthening India’s position as a hub for clean cement technologies.

The partnership also includes a roadmap to deploy RotoDynamic Technology across additional Adani Cement sites, with at least five more projects planned over the next two years. The first-generation RDH will provide hot gases at approximately 1000°C, enabling more efficient use of alternative fuels.

Adani Cement’s wider sustainability strategy targets raising the share of alternative fuels and resources to 30 per cent and increasing green power use to 60 per cent by FY28. The RDH deployment supports the company’s Science Based Targets initiative (SBTi)-validated commitment to achieve net-zero emissions by 2050.

Concrete

Birla Corporation Q2 EBITDA Surges 71%, Net Profit at Rs 90 Crore

Stronger margins and premium cement sales boost quarterly performance.

Published

3 days ago

November 12, 2025

admin

Birla Corporation Limited reported a consolidated EBITDA of Rs 3320 million for the September quarter of FY26, a 71 per cent increase over the same period last year, driven by improved profitability in both its Cement and Jute divisions. The company posted a consolidated net profit of Rs 900 million, reversing a loss of Rs 250 million in the corresponding quarter last year.

Consolidated revenue stood at Rs 22330 million, marking a 13 per cent year-on-year growth as cement sales volumes rose 7 per cent to 4.2 million tonnes. Despite subdued cement demand, weak pricing, and rainfall disruptions, Birla Jute Mills staged a turnaround during the quarter.

Premium cement continued to drive performance, accounting for 60 per cent of total trade sales. The flagship brand Perfect Plus recorded 20 per cent growth, while Unique Plus rose 28 per cent year-on-year. Sales through the trade channel reached 79 per cent, up from 71 per cent a year earlier, while blended cement sales grew 14 per cent, forming 89 per cent of total cement sales. Madhya Pradesh and Rajasthan remained key growth markets with 7–11 per cent volume gains.

EBITDA per tonne improved 54 per cent to Rs 712, with operating margins expanding to 14.7 per cent from 9.8 per cent last year, supported by efficiency gains and cost reduction measures.

Sandip Ghose, Managing Director and CEO, said, “The Company was able to overcome headwinds from multiple directions to deliver a resilient performance, which boosts confidence in the robustness of our strategies.”

The company expects cement demand to strengthen in the December quarter, supported by government infrastructure spending and rural housing demand. Growth is anticipated mainly from northern and western India, while southern and eastern regions are expected to face continued supply pressures.

Concrete

Ambuja Cements Delivers Strong Q2 FY26 Performance Driven by R&D and Efficiency

Company raises FY28 capacity target to 155 MTPA with focus on cost optimisation and AI integration

Published

5 days ago

November 10, 2025

admin

Ambuja Cements, part of the diversified Adani Portfolio and the world’s ninth-largest building materials solutions company, has reported a robust performance for Q2 FY26. The company’s strong results were driven by market share gains, R&D-led premium cement products, and continued efficiency improvements.

Vinod Bahety, Whole-Time Director and CEO, Ambuja Cements, said, “This quarter has been noteworthy for the cement industry. Despite headwinds from prolonged monsoons, the sector stands to benefit from several favourable developments, including GST 2.0 reforms, the Carbon Credit Trading Scheme (CCTS), and the withdrawal of coal cess. Our capacity expansion is well timed to capitalise on this positive momentum.”

Ambuja has increased its FY28 capacity target by 15 MTPA — from 140 MTPA to 155 MTPA — through debottlenecking initiatives that will come at a lower capital expenditure of USD 48 per metric tonne. The company also plans to enhance utilisation of its existing 107 MTPA capacity by 3 per cent through logistics infrastructure improvements.

To strengthen its product mix, Ambuja will install 13 blenders across its plants over the next 12 months to optimise production and increase the share of premium cement, improving realisations. These operational enhancements have already contributed to a 5 per cent reduction in cost of sales year-on-year, resulting in an EBITDA of Rs 1,060 per metric tonne and a PMT EBITDA of approximately Rs 1,189.

Looking ahead, the company remains optimistic about achieving double-digit revenue growth and maintaining four-digit PMT EBITDA through FY26. Ambuja aims to reduce total cost to Rs 4,000 per metric tonne by the end of FY26 and further by 5 per cent annually to reach Rs 3,650 per metric tonne by FY28.

Bahety added, “Our Cement Intelligent Network Operations Centre (CiNOC) will bring a paradigm shift to our business operations. Artificial Intelligence will run deep within our enterprise, driving efficiency, productivity, and enhanced stakeholder engagement across the value chain.”