Concrete

SpectraFlow for Ramco plant

Published

4 years ago

July 1, 2021

admin

Ramco Cements, an independent Indian group, ordered a Crossbelt and Airslide analyser from SpectraFlow analytics, for their new integrated plant at Kalvatala, to optimise the stability of their raw meal.

FLS was chosen as the main equipment supplier and Ramco project team looked after specialised components themselves and choose SpectraFlow Analytics Crossbelt analyser for their stockpile and pre-blending management and SpectraFlow Airslide Analyzer for raw meal optimisation of two raw mills.

The SpectraFlow Crossbelt analyser is the online analyser to be able to measure raw materials on belt conveyors. As raw materials from the quarry are processed through a crusher the raw material on the conveyor belt is statistically homogeneous and therefore the analytical results of the SpectraFlow Crossbelt analyser are accurate.

By using SpectraFlow Crossbelt analyser and a site specific blending strategy at Kavalatala the high variation in the local raw materials shall be balanced out to increase consistency of the stockpile quality.

Summarised benefits are:

– No need of sampling. Sampling from conveyor belts is unrepresentative and slow for process optimisation. Additionally, sampling is very work intensive regarding operation and maintenance.

– The analyser together with a pre-blending control software from Ramco Systems is fully automating the feed from the hoppers. The analyser delivers the analytical results and according the setpoint the software is adjusting the feeders into the mixing stage

– The analyser together with a pre-blending control software is informing the quarry/crusher operators of the current composition of the stockpile and accordingly the trucks can be coordinated to reach the setpoint of the stockpile.

– Stockpile quality will be homogeneous and on setpoint. That results in stable and low additive consumption at the raw mill.

– Stable feed from the stockpile leads to stable raw mill operation and fine raw meal/clinker quality.

The SpectraFlow Airslide analyser is the online analyser to be able to measure raw materials in airslides. As raw materials in airslides are very homogeneous and dry the analytical results of the SpectraFlow Airslide analyser are very accurate and based on these accurate results the raw mix control software can optimise the weight feeders before the raw mill in real time every minute. This results in very low LSF STDEV without the need of extensive sampling and laboratory efforts.

Kalvatala operates two roller press raw. The raw meal will feed to a joint airslide where the SpectraFlow Airslide analyser will measure. For the control of the weight feeders at the two raw mills Ramco will use control software from Ramco Systems. By using SpectraFlow an increase in the raw meal homogeneity will be achieved.

Summarised benefits are:

– Two raw mills can be controlled by one online analyser.

– No need of intensive sampling. No automated sample transport system, no automated laboratory required.

– High cost reduction due to reduced laboratory usage (capex, opex, manpower??

– The analyser together with the control software is fully automating the raw material grinding. The analyser delivers the analytical results and according the setpoint the software is adjusting the weight feeders of the additive bins.

– Adjustment of the weight feeders in real time every minute. No time delay due to sampling, sample preparation,

– Lower LSF STDEV/better and more consistent raw mill quality

This SpectraFlow order is the 39th order for the cement industry and the first installation in India. This order raises the installed based in India to

two analysers (one crossbelt and one airslide) and worldwide to 56 analysers (31 crossbelt and 25 airslide).

SpectraFlow Analytics, Switzerland are the experts in providing online analysis for the cement and minerals industry without any radioactive sources nor neutron generators. NIR technology used for

the SpectraFlow analyser is not requiring any permits or licenses and there are no restrictions in buying, importing or maintaining the analysers. This results in very low operating costs and high availability of the analysers combined with highly accurate measurement results.

For further information: Vijay Kumar Vemuri,

Managing Partner, SPV Engineers, 2242, BHEL MIG,

Phase-I, Serilingampally, Hyderabad ??502032.

Mob: +91 88857 44161

Email: vk.vemuri@spvengineers.com

Concrete

Berger Paints Announces Financial Results for the Quarter Ended

Net Profit for the quarter was Rs 2.06 billion, compared to Rs 2.69 billion in the corresponding quarter of the previous year.

Published

5 hours ago

November 5, 2025

admin

Berger Paints India announced its financial results for the quarter ended September 30, 2025.

The company reported Revenue from Operations of Rs 28.27 billion, compared to Rs 27.74 billion in the corresponding quarter last year, reflecting a growth of 1.9 per cent year-on-year.

EBITDA (excluding other income) stood at Rs 3.52 billion, as against Rs 4.34 billion in the same period last year, registering a decline of 18.9 per cent.

Net Profit for the quarter was Rs 2.06 billion, compared to Rs 2.69 billion in the corresponding quarter of the previous year, marking a decline of 23.5 per cent year-on-year.

Commenting on the performance, Abhijit Roy, Managing Director & CEO, Berger Paints India, said, “At Berger Paints, we remain committed to driving growth through network expansion, innovation, and brand building. Our focus continues to be on delivering long-term value for our investors and stakeholders.”

Concrete

Ambuja Cements posts record Q2, lifts FY28 capacity target

PAT rises to Rs 23.02 bn; volumes up 20%; margin widens 450 bps

Published

5 hours ago

November 5, 2025

admin

Ahmedabad, recently — Ambuja Cements, part of the Adani Portfolio, reported a strong Q2 FY26 performance with consolidated PAT of Rs 23.02 billion (up 364 per cent year on year), highest-ever Q2 sales volume of 16.6 million tonnes (up 20 per cent) and revenue of Rs 91.74 billion (up 21 per cent). EBITDA rose to Rs 17.61 billion with a margin of 19.2 per cent, while EBITDA per tonne reached Rs 1,060 (up 32 per cent). EPS stood at Rs 7.2 (up 267 per cent). The PAT figure includes an income-tax provision reversal of Rs 16.97 billion.

The company raised its FY28 capacity goal by 15 MTPA to 155 MTPA, largely through low-capex debottlenecking at about USD 48 per tonne. Thirteen new blenders are being installed to optimise product mix and lift the share of premium cement, and logistics debottlenecking is expected to add around three per cent utilisation to the existing 107 MTPA base over 24 months.

On projects, a 4 MTPA kiln at Bhatapara has begun trial runs, the 2 MTPA Krishnapatnam grinding unit has been operationalised, and an additional 7 MTPA across three locations is slated for Q3. Renewable power capacity reached 673 MW after commissioning 200 MW, with targets of 900 MW by year-end and 1,122 MW by FY27.

Cost discipline continued: kiln fuel, power and logistics costs declined year on year; green power share of consumption rose to 32.9 per cent; and logistics cost stood at Rs 1,224 per tonne. Management reiterated end-FY26 total cost guidance of about Rs 4,000 per tonne and a pathway to Rs 3,650 per tonne by FY28, supported by higher coal share, newer assets, shorter lead distances (including a growing sea-logistics share), and long-term fly ash/slag tie-ups.

Strategically, Ambuja launched CiNOC (Cement Intelligent Network Operations Centre) to embed AI across sales, production and logistics; deepened engagements with CONCOR, CREDAI and 400+ academic partners; and ordered seven vessels totalling 65,800 DWT to lift coastal movement to five per cent. The company remains debt-free with net worth of Rs 694.93 billion and the highest Crisil ratings (AAA/Stable; A1+).

Concrete

India, EU Resume Talks To Finalise Free Trade Agreement

High-level negotiators meet in Delhi to push balanced trade deal

Published

1 day ago

November 4, 2025

admin

A senior delegation from the European Union (EU) is in New Delhi from 3 to 7 November 2025 to hold detailed discussions with Indian counterparts on the proposed India–EU Free Trade Agreement (FTA). The negotiations aim to resolve key pending issues and move closer to a comprehensive, balanced, and mutually beneficial trade framework.

The visit follows Union Minister of Commerce and Industry Piyush Goyal’s official trip to Brussels on 27–28 October 2025, during which he held forward-looking talks with European Commissioner for Trade and Economic Security Maroš Šef?ovi?. Both sides reaffirmed their commitment to intensify dialogue and strengthen cooperation towards finalising the FTA.

This week’s deliberations will focus on trade in goods and services, rules of origin, and technical and institutional matters, guided by the shared goal of creating a modern and future-ready trade pact that reflects the priorities and sensitivities of both India and the EU.

The discussions gained further momentum after a virtual meeting on 3 November 2025 between Minister Piyush Goyal, Commissioner Maroš Šef?ovi?, and EU Commissioner for Agriculture and Food Christophe Hansen, which helped align positions on key areas of mutual interest.

As part of the ongoing negotiations, Ms. Sabine Weyand, Director-General for Trade at the European Commission (EU DG Trade), will visit New Delhi on 5–6 November for high-level consultations with India’s Commerce Secretary Rajesh Aggarwal. The talks will address technical and policy matters critical to concluding the agreement.

The EU delegation’s visit underscores the shared determination of India and the European Union to conclude a fair, transparent, and equitable FTA, aimed at boosting trade, investment, innovation, and sustainable economic growth.

Both sides view the FTA as a strategic pillar in their partnership, capable of enhancing market access, creating new opportunities for businesses, and promoting a resilient and diversified global supply chain.