Product development
Transfer chute design for solid alternative fuels
Published
6 years agoon
By
adminFor the AF system, it is basic requirement for achieving high thermal substitution rate that to utilise all type of available AF like refuse-derived, industrial plastic, biomass, tire chips and hazardous waste effectively, efficiently and economically. Transfer chute is a crucial component of the material handling chain, yet too often also the weakest link and need special attention to ensure smooth handling operation.
Indian cement plants are adopting the alternate fuels (AF) for sustainable development and achieving adequate thermal substitution rate (TSR) as per the Government Guidelines 2016. To achieve the targeted TSR, the Indian cement manufacturers are adopting all the possible alternate fuels according to their geographical availability and economic viability. For AF systems, it is a basic requirement to handle all types of AF utilised by the cement plant like refuse-derived fuel (RDF), industrial plastic waste, biomass, tire chips, hazardous waste, etc. to run the plant effectively, efficiently and economically. The outcome of last decade indicates that the Indian cement industries are now well aware about various equipment available for AF handling, and technical know-how is required only for selection of right equipment at right place for right material. There are several studies that assess the impact of AF on process and main equipment. Another big reason why cement industries do not focus towards increasing TSR is the uncertainty in availability of waste. A single type of AF is not always available and cement plants need to alternate between several AFs (or combine different AFs) to achieve substantial TSR.
Chute transfers are crucial components of the material handling chain, yet too often also the weakest link. They are typically employed in belt conveying systems to transfer bulk materials from feeders, screens, transfer from one conveyor to another or finally discharged into burners/pre-calciner. Chute design often demands more attention and can be the source of more downtime than the conveyors or equipment that precede or follow them. When a generic chute handles AF in combinations with variation of material characteristics or operational requirements often results in problems which translates to loss in productivity and stalled operation due to jamming or unpredictable behavior of chute.
Problem in chutes
To achieve high TSR values, it is required to explore the various type of AFs and study the wide range of variation in their physical properties. Some of them are bulk density, particle size, particle shape, moisture content, cohesion, adhesion, etc. Different AFs possess different characteristics and may require different set-ups for co-processing. These characteristics define different flow ability for AFs. The conventional methods of chute design selection currently used, do not take into account this variation and this may leads to plugging of chutes at the impact points, uncontrolled flow of material, excessive wear on chute surfaces, Excessive generation of dust, attrition or breakdown of particles and finally frequent jamming in chutes. All these problems occur frequently and demands very high attention and so the maintenance will become frequent business. Not only scheduled maintenance, in the event of breakdowns, it became more crucial and urgent attention need to be given for immediate remedy.
Solution
It is necessary to handle different AF in an optimised manner. To do this one of the solution could be to find a common chute design which can accommodate all possible AF being utilized in a system with minor setup of mountings. If not possible then certain module can also be found to handle similar type of AF through one channel of handling system.
Modelling of bulk material for which system is being planned can be act as a primary tool to find the characteristics of the flow. The simulation will also help in observing the behavior of a chute towards a particular material flow. The modelling can be done on any CFD (Computational Fluid Dynamics) software which may provide modelling method for bulk granular flow material simulations. A few possible models are described below:
1.Discrete Element method: It considers the material as a collection of particles flowing independently and they move under the influence of rotation, momentum exchange, contact forces and drag and lift forces.
2.Continuum model: When the intermolecular distance is much larger than size of molecule than the properties are not homogenous at all points. To model such materials we consider them continuous and form a continuum model.
3.The Eulerian model: The different phases are treated mathematically as interpenetrating continua. Since volume of one phase cannot be occupies other phases, the concept of phasic volume fraction is utilised.
The outcome of the correct CFD model analysis will provide the direct benefit to the cement manufacturers and the design consultants in the following ways:
Readymade design for selection inline of expected combinations of alternatives fuels.
Least shutdown/stoppage due to jamming of chutes and Safe and environmental friendly operation
Established know-how for particular combination of AFs and Standard guidelines to follow while setting up material handling system, especially the chute proximity subsystem.
Conclusion
The detail analysis on CFD will help the Engineers to run tests without causing much financial burden. An optimum design of chutes can be found and verified with the help of available model. The results can be used for selection of specific chute design for a given requirement and material. More versatile chute design can be used very easily. NCCBM is having latest software of CFD and recently carried out number of CFD studies in various area of cement plant. Outcome of these studies were found very much useful for system design improvement and process optimisation.
About the auther Kapil Kukreja, Dr BN Mohapatra and Ashutosh Saxena are from the National Council for Cement and Building Materials (NCCBM), Ballabgarh, India.
You may like
Advertising or branding is never about driving sales. It’s about creating brand awareness and recall. It’s about conveying the core values of your brand to your consumers. In this context, why is branding important for cement companies? As far as the customers are concerned cement is simply cement. It is precisely for this reason that branding, marketing and advertising of cement becomes crucial. Since the customer is unable to differentiate between the shades of grey, the onus of creating this awareness is carried by the brands. That explains the heavy marketing budgets, celebrity-centric commercials, emotion-invoking taglines and campaigns enunciating the many benefits of their offerings.
Marketing strategies of cement companies have undergone gradual transformation owing to the change in consumer behaviour. While TV commercials are high on humour and emotions to establish a fast connect with the customer, social media campaigns are focussed more on capturing the consumer’s attention in an over-crowded virtual world. Branding for cement companies has become a holistic growth strategy with quantifiable results. This has made brands opt for a mix package of traditional and new-age tools, such as social media. However, the hero of every marketing communication is the message, which encapsulates the unique selling points of the product. That after all is crux of the matter here.
While cement companies are effectively using marketing tools to reach out to the consumers, they need to strengthen the four Cs of the branding process – Consumer, Cost, Communication and Convenience. Putting up the right message, at the right time and at the right place for the right kind of customer demographic is of utmost importance in the long run. It is precisely for this reason that regional players are likely to have an upper hand as they rely on local language and cultural references to drive home the point. But modern marketing and branding domain is exponentially growing and it would be an interesting exercise to tabulate and analyse its impact on branding for cement.
Concrete
Indian cement industry is well known for its energy and natural resource efficiency
Published
2 years agoon
November 18, 2022By
adminDr Hitesh Sukhwal, Deputy General Manager – Environment, Udaipur Cement Works Limited (UCWL) takes us through the multifaceted efforts that the company has undertaken to keep emissions in check with the use of alternative sources of energy and carbon capture technology.
Tell us about the policies of your organisation for the betterment of the environment.
Caring for people is one of the core values of our JK Lakshmi Cement Limited. We strongly believe that we all together can make a difference. In all our units, we have taken measures to reduce carbon footprint, emissions and minimise the use of natural resources. Climate change and sustainable development are major global concerns. As a responsible corporate, we are committed with and doing consistent effort small or big to preserve and enrich the environment in and around our area of operations.
As far as environmental policies are concerned, we are committed to comply with all applicable laws, standards and regulations of regulatory bodies pertaining to the environment. We are consistently making efforts to integrate the environmental concerns into the mainstream of the operations. We are giving thrust upon natural resource conservation like limestone, gypsum, water and energy. We are utilising different kinds of alternative fuels and raw materials. Awareness among the employees and local people on environmental concerns is an integral part of our company. We are adopting best environmental practices aligned with sustainable development goals.
Udaipur Cement Works Limited is a subsidiary of the JK Lakshmi Cement Limited. Since its inception, the company is committed towards boosting sustainability through adopting the latest art of technology designs, resource efficient equipment and various in-house innovations. We are giving thrust upon renewable and clean energy sources for our cement manufacturing. Solar Power and Waste Heat Recovery based power are our key ingredients for total power mix.
What impact does cement production have on the environment? Elaborate the major areas affected.
The major environmental concern areas during cement production are air emissions through point and nonpoint sources due to plant operation and emissions from mining operation, from material transport, carbon emissions through process, transit, noise pollution, vibration during mining, natural resource depletion, loss of biodiversity and change in landscape.
India is the second largest cement producer in the world. The Indian cement industry is well known for its energy and natural resource efficiency worldwide. The Indian cement industry is a frontrunner for implementing significant technology measures to ensure a greener future.
The cement industry is an energy intensive and significant contributor to climate change. Cement production contributes greenhouse gases directly and indirectly into the atmosphere through calcination and use of fossil fuels in an energy form. The industry believes in a circular economy by utilising alternative fuels for making cement. Cement companies are focusing on major areas of energy efficiency by adoption of technology measures, clinker substitution by alternative raw material for cement making, alternative fuels and green and clean energy resources. These all efforts are being done towards environment protection and sustainable future.
Nowadays, almost all cement units have a dry manufacturing process for cement production, only a few exceptions where wet manufacturing processes are in operation. In the dry manufacturing process, water is used only for the purpose of machinery cooling, which is recirculated in a closed loop, thus, no polluted water is generated during the dry manufacturing process.
We should also accept the fact that modern life is impossible without cement. However, through state-of-the-art technology and innovations, it is possible to mitigate all kinds of pollution without harm to the environment and human beings.
Tell us about the impact blended cement creates on the environment and emission rate.
Our country started cement production in 1914. However, it was introduced in the year 1904 at a small scale, earlier. Initially, the manufacturing of cement was only for Ordinary Portland Cement (OPC). In the 1980s, the production of blended cement was introduced by replacing fly ash and blast furnace slag. The production of blended cement increased in the growth period and crossed the 50 per cent in the year 2004.
The manufacturing of blended cement results in substantial savings in the thermal and electrical energy consumption as well as saving of natural resources. The overall consumption of raw materials, fossil fuel such as coal, efficient burning and state-of-the-art technology in cement plants have resulted in the gradual reduction of emission of carbon dioxide (CO2). Later, the production of blended cement was increased in manifolds.
If we think about the growth of blended cement in the past few decades, we can understand how much quantity of , (fly ash and slag) consumed and saved natural resources like limestone and fossil fuel, which were anyhow disposed of and harmed the environment. This is the reason it is called green cement. Reduction in the clinker to cement ratio has the second highest emission reduction potential i.e., 37 per cent. The low carbon roadmap for cement industries can be achieved from blended cement. Portland Pozzolana Cement (PPC), Portland Slag Cement (PSC) and Composite Cement are already approved by the National Agency BIS.
As far as kilogram CO2 per ton of cement emission concerns, Portland Slag Cement (PSC) has a larger potential, other than PPC, Composite Cement etc. for carbon emission reduction. BIS approved 60 per cent slag and 35 per cent clinker in composition of PSC. Thus, clinker per centage is quite less in PSC composition compared to other blended cement. The manufacturing of blended cement directly reduces thermal and process emissions, which contribute high in overall emissions from the cement industry, and this cannot be addressed through adoption of energy efficiency measures.
In the coming times, the cement industry must relook for other blended cement options to achieve a low carbon emissions road map. In near future, availability of fly ash and slag in terms of quality and quantity will be reduced due to various government schemes for low carbon initiatives viz. enhance renewable energy sources, waste to energy plants etc.
Further, it is required to increase awareness among consumers, like individual home builders or large infrastructure projects, to adopt greener alternatives viz. PPC and PSC for more sustainable
resource utilisation.
What are the decarbonising efforts taken by your organisation?
India is the world’s second largest cement producer. Rapid growth of big infrastructure, low-cost housing (Pradhan Mantri Awas Yojna), smart cities project and urbanisation will create cement demand in future. Being an energy intensive industry, we are also focusing upon alternative and renewable energy sources for long-term sustainable business growth for cement production.
Presently, our focus is to improve efficiency of zero carbon electricity generation technology such as waste heat recovery power through process optimisation and by adopting technological innovations in WHR power systems. We are also increasing our capacity for WHR based power and solar power in the near future. Right now, we are sourcing about 50 per cent of our power requirement from clean and renewable energy sources i.e., zero carbon electricity generation technology. Usage of alternative fuel during co-processing in the cement manufacturing process is a viable and sustainable option. In our unit, we are utilising alternative raw material and fuel for reducing carbon emissions. We are also looking forward to green logistics for our product transport in nearby areas.
By reducing clinker – cement ratio, increasing production of PPC and PSC cement, utilisation of alternative raw materials like synthetic gypsum/chemical gypsum, Jarosite generated from other process industries, we can reduce carbon emissions from cement manufacturing process. Further, we are looking forward to generating onsite fossil free electricity generation facilities by increasing the capacity of WHR based power and ground mounted solar energy plants.
We can say energy is the prime requirement of the cement industry and renewable energy is one of the major sources, which provides an opportunity to make a clean, safe and infinite source of power which is affordable for the cement industry.
What are the current programmes run by your organisation for re-building the environment and reducing pollution?
We are working in different ways for environmental aspects. As I said, we strongly believe that we all together can make a difference. We focus on every environmental aspect directly / indirectly related to our operation and surroundings.
If we talk about air pollution in operation, every section of the operational unit is well equipped with state-of-the-art technology-based air pollution control equipment (BagHouse and ESP) to mitigate the dust pollution beyond the compliance standard. We use high class standard PTFE glass fibre filter bags in our bag houses. UCWL has installed the DeNOx system (SNCR) for abatement of NOx pollution within norms. The company has installed a 6 MW capacity Waste Heat Recovery based power plant that utilises waste heat of kiln i.e., green and clean energy source. Also, installed a 14.6 MW capacity solar power system in the form of a renewable energy source.
All material transfer points are equipped with a dust extraction system. Material is stored under a covered shed to avoid secondary fugitive dust emission sources. Finished product is stored in silos. Water spraying system are mounted with material handling point. Road vacuum sweeping machine deployed for housekeeping of paved area.
In mining, have deployed wet drill machine for drilling bore holes. Controlled blasting is carried out with optimum charge using Air Decking Technique with wooden spacers and non-electric detonator (NONEL) for control of noise, fly rock, vibration, and dust emission. No secondary blasting is being done. The boulders are broken by hydraulic rock breaker. Moreover, instead of road transport, we installed Overland Belt Conveying system for crushed limestone transport from mine lease area to cement plant. Thus omit an insignificant amount of greenhouse gas emissions due to material transport, which is otherwise emitted from combustion of fossil fuel in the transport system. All point emission sources (stacks) are well equipped with online continuous emission monitoring system (OCEMS) for measuring parameters like PM, SO2 and NOx for 24×7. OCEMS data are interfaced with SPCB and CPCB servers.
The company has done considerable work upon water conservation and certified at 2.76 times water positive. We installed a digital water flow metre for each abstraction point and digital ground water level recorder for measuring ground water level 24×7. All digital metres and level recorders are monitored by an in-house designed IoT based dashboard. Through this live dashboard, we can assess the impact of rainwater harvesting (RWH) and ground water monitoring.
All points of domestic sewage are well connected with Sewage Treatment Plant (STP) and treated water is being utilised in industrial cooling purposes, green belt development and in dust suppression. Effluent Treatment Plant (ETP) installed for mine’s workshop. Treated water is reused in washing activity. The unit maintains Zero Liquid Discharge (ZLD).
Our unit has done extensive plantations of native and pollution tolerant species in industrial premises and mine lease areas. Moreover, we are not confined to our industrial boundary for plantation. We organised seedling distribution camps in our surrounding areas. We involve our stakeholders, too, for our plantation drive. UCWL has also extended its services under Corporate Social Responsibility for betterment of the environment in its surrounding. We conduct awareness programs for employees and stakeholders. We have banned Single Use Plastic (SUP) in our premises. In our industrial township, we have implemented a solid waste management system for our all households, guest house and bachelor hostel. A complete process of segregated waste (dry and wet) door to door collection systems is well established.
Tell us about the efforts taken by your organisation to better the environment in and around the manufacturing unit.
UCWL has invested capital in various environmental management and protection projects like installed DeNOx (SNCR) system, strengthening green belt development in and out of industrial premises, installed high class pollution control equipment, ground-mounted solar power plant etc.
The company has taken up various energy conservation projects like, installed VFD to reduce power consumption, improve efficiency of WHR power generation by installing additional economiser tubes and AI-based process optimisation systems. Further, we are going to increase WHR power generation capacity under our upcoming expansion project. UCWL promotes rainwater harvesting for augmentation of the ground water resource. Various scientifically based WHR structures are installed in plant premises and mine lease areas. About 80 per cent of present water requirement is being fulfilled by harvested rainwater sourced from Mine’s Pit. We are also looking forward towards green transport (CNG/LNG based), which will drastically reduce carbon footprint.
We are proud to say that JK Lakshmi Cement Limited has a strong leadership and vision for developing an eco-conscious and sustainable role model of our cement business. The company was a pioneer among cement industries of India, which had installed the DeNOx (SNCR) system in its cement plant.
Concrete
NTPC selects Carbon Clean and Green Power for carbon capture facility
Published
2 years agoon
October 12, 2022By
adminCarbon Clean and Green Power International Pvt. Ltd has been chosen by NTPC Energy Technology Research Alliance (NETRA) to establish the carbon capture facility at NTPC Vindhyachal. This facility, which will use a modified tertiary amine to absorb CO2 from the power plant’s flue gas, is intended to capture 20 tonnes of CO2) per day. A catalytic hydrogenation method will eventually be used to mix the CO2 with hydrogen to create 10 tonnes of methanol each day. For NTPC, capturing CO2 from coal-fired power plant flue gas and turning it into methanol is a key area that has the potential to open up new business prospects and revenue streams.
Construction Costs Rise 11% in 2024, Driven by Labour Expenses
Swiss Steel to Cut 800 Jobs
UltraTech Cement to raise Rs 3,000 crore via NCDs to boost financial flexibility
India’s April-October Finished Steel Imports Reach 7-Year High
NMDC Steel Q2 loss expands to Rs 5.95 bn, income at Rs 15.35 bn
Construction Costs Rise 11% in 2024, Driven by Labour Expenses
Swiss Steel to Cut 800 Jobs
UltraTech Cement to raise Rs 3,000 crore via NCDs to boost financial flexibility
India’s April-October Finished Steel Imports Reach 7-Year High
NMDC Steel Q2 loss expands to Rs 5.95 bn, income at Rs 15.35 bn
Trending News
-
Concrete1 month ago
Adani acquires Orient Cement at INR 8,100 crore equity value
-
Concrete1 week ago
Shree Cement increases its S&P Global ESG Score
-
Concrete4 weeks ago
Ambuja Cements Acquires Orient Cement
-
Concrete1 month ago
Lohia Corp Expands Global Footprint With Acquisitionof J.j. Jenkins Inc and Strategic Joint Venture With Omgm