Connect with us

Concrete

Sustainable Procurement Practices

Published

on

Shares

Partha Dash, Managing Director, Moglix, discusses how India’s cement industry, a key player in the country’s construction growth, is at a critical juncture as it faces the challenge of balancing expansion with sustainable practices.

According to research by construction blog Bimhow, the construction sector contributes to 23 per cent of air pollution, 50 per cent of the climatic change, 40 per cent of drinking water pollution, and 50 per cent of landfill wastes. Over the last decade cement has been one ubiquitous element in India’s construction growth story. As the world’s second-largest producer, we are seeing an impressive growth trajectory. Major players like Birla, Adani, Dalmia Bharat, JK Cement and Shree Cement are expanding fast, with plans to add 150-160 million tonnes of capacity over the next five years. This follows a substantial increase of 120 million tonnes in the past five years, pushing India’s total capacity to around 600 million tonnes. But with all this expansion, we have got a big question – How do we ensure sustainable procurement practices, in such an energy dependent industry?

Energy-intensive nature of cement production
Making cement takes a lot of energy. Process starts with limestone being mined, crushed, and grounded, using about 5-6 per cent of the total energy. The biggest energy use happens during clinker production, where around 94-95 per cent of the energy is used. Here is where limestone is heated to very high temperatures in a kiln, which needs a lot of energy from fossil fuels like coal and pet coke. Electricity is also used to run equipment like fans and kiln drives.
Once the clinker is made, it’s ground into cement. This grinding process uses another 5-6 per cent of the energy and usually happens at facilities close to where the cement is needed. Facilities that handle both clinker production and grinding in one place are generally more energy-efficient. Many of these places use coal-powered plants to supply the heat needed for the kilns, keeping production steady.

Transitioning to bulk cement
Making cement use more efficient is key to reducing the industry’s carbon footprint. In India, as per research by World Economic Forum around 75-80 per cent of cement is sold in 50kg bags to small-scale builders and individuals. But there’s often little insight into how this bagged cement is used. Research from the World Economic Forum also shows that about 40 per cent of this cement is mixed by hand. Builders sometimes use more cement than needed, thinking it will make the structure stronger, which increases emissions.
It’s crucial to educate these small-scale users about using cement efficiently. Builders need accurate information on mixing ratios and should be encouraged to adopt design techniques that use less cement. One idea suggested in the report is to put embodied carbon labels on cement bags to provide this information, helping to promote more sustainable practices at the grassroots level.
On the flip side, bulk cement, which now makes up 20-25 per cent of India’s cement use, has its own set of challenges and opportunities. Bulk cement is often used for large-scale projects that need high-strength concrete, which tends to be more carbon-intensive. However, it also makes it easier to mix in supplementary cementitious materials (SCM), which can reduce the carbon intensity of the cement. As bulk cement use grows, especially in big infrastructure projects, balancing structural needs with lower-carbon solutions will be crucial.

Challenges in sustainable procurement
The cement industry finds it hard to adopt sustainable procurement because many companies aren’t fully on board with it. Sometimes, sustainability isn’t a big focus for the company, which means top management doesn’t fully support it. This lack of support slows down collaboration with environmental experts and limits the adoption of green practices. Additionally, many clients still prefer traditional materials, which means there’s less demand for sustainable options.
In terms of knowledge and innovation, there’s a gap in understanding how to incorporate green procurement into existing practices. Many companies aren’t fully aware of the benefits of adopting green strategies or getting environmental certifications. This lack of knowledge also affects the public sector, where innovation in sustainable practices is often held back due to a shortage of technical support and experts.
There’s also a common belief that green procurement is more expensive, which can be a significant barrier, especially when resources for sustainable products are limited. Awareness and readiness for green practices are still low. Many people don’t fully understand the importance of sustainable procurement in construction, and there’s a lack of information about the market for green materials. Without adequate training and a clear structure for green purchasing, it’s difficult for companies to fully commit to sustainability. Moreover, existing policies and regulations aren’t strong enough to drive real change and without enforcement and incentives, the availability of green materials remains limited.

Opportunities in sustainable procurement
To fully understand the opportunities in sustainable procurement, Indian construction companies need to make it a key part of their business approach. This requires strong support from top leadership, including CEOs and boards of directors. When sustainability is a central focus in a company’s goals, it not only improves environmental impact but also sets the company apart in the market. Firms that focus on green practices can attract clients who value sustainability.
Working together with industry, academic institutions and government bodies is crucial for advancing green procurement. Top institutions in India like IIMs and IITs should collaborate with agencies like the Central Pollution Control Board and the Ministry of Environment. These partnerships can help develop shared goals and standards, like ISO 14000 for Environmental Management Systems, and offer training programs across the country.
It’s crucial to help clients understand how green buildings can save money over time. These sustainable structures not only cut down on running costs but also enhance the quality of life for those who live or work in them. Organisations such as the Construction Federation of India and the Builders Association of India should promote green products, which can drive demand and reduce costs by boosting production.
The government’s role is also vital. Programmes like the Pradhan Mantri Awas Yojana should focus on using green materials to show that sustainable construction can be affordable. To encourage use of sustainable materials, giving incentives like tax breaks, just like the ones for electric vehicles, could make a big difference.
Establishing a national certification for green procurement professionals, backed by organisations like the Indian Green Building Council, can help create a skilled workforce that can lead sustainable practices in the construction industry. By seizing these opportunities, India can move toward a more sustainable future in construction.

India’s leadership in sustainable cement production
India has made impressive strides in sustainable cement production. As per a research report by JMK research and analytics in 2022, the global cement industry accounted for 26.8 per cent of industrial emissions, but Indian manufacturers have been proactive in reducing their carbon footprint. The same report also states that between 2017 and 2022, the industry cut its emissions intensity by 19.4 per cent, thanks to a rise in alternative materials like fly ash and slag Blended cements, which now make up 81 per cent of India’s output, are a big part of this progress.
Leading cement producers in India, including Ultratech Cement, Shree Cement and Dalmia Cement, have committed to reducing emissions by 20 per cent by 2030, with a long-term goal of achieving net-zero emissions by 2050. Recently, the industry introduced 150 electric trucks to reduce carbon footprints, though challenges like limited charging infrastructure and high costs remain. Still, this move is expected to cut logistics expenses by 25-40 per cent. The industry is also pushing for policy support to accelerate the adoption of electric trucks and further its sustainability goals. According to report published by India Brand and Equity Foundation, some of the major investments in renewable energy and energy storage solutions include:

  • UltraTech Cement plans to deploy 500 electric trucks and 1,000 LNG/CNG vehicles by June 2025, cutting transport emissions by 680 tonnes annually. They aim to reach 85 per cent green energy use by 2030 and boost production capacity to 200 million tonnes.
  • Shree Cement completed a 6.7 MW solar project in Haryana in September 2022.
  • Dalmia Cement aims to produce 100 per cent low-carbon cement by 2031, supported by a $405 million carbon capture investment.
  • JK Cement signed an agreement with PRESPL in October 2021 to increase the use of biomass and alternative fuels, reducing reliance on coal.

Is the impossible possible?
The Indian construction and cement industries are making prudent strides toward sustainability. Recent research shows a strong link between the use of renewable energy and economic growth, highlighting the importance of reducing reliance on traditional energy sources. The construction industry, which has a large environmental impact, must adopt greener practices to help reduce pollution and waste.
The Indian cement industry is leading the way, with plans to significantly increase its use of renewable energy by 2026. This shift not only helps reduce costs but also sets a positive example for other sectors. The focus on renewable energy, like solar and wind, and efforts to avoid new thermal power plants show a clear commitment to a more sustainable future.
As the cement industry continues to push for net-zero emissions by 2050, its proactive approach is setting a new standard. These efforts not only benefit the industry itself but also provide a roadmap for others to follow. By embracing greener practices, the cement industry is helping to pave the way for more sustainable and environmentally friendly procurement practices in India.

About the author:
Partha Dash, Managing Director, Moglix, is a sales and marketing professional with 15+ years of hands-on experience in shaping businesses especially in the emerging markets.

Concrete

UltraTech Appoints Jayant Dua As MD-Designate For 2027

Executive named to succeed current managing director in 2027

Published

on

By

Shares

UltraTech Cement has appointed Jayant Dua as managing director (MD) designate who will take charge in 2027, the company announced. The appointment signals a planned leadership transition at one of the country’s largest cement manufacturers. The board has set a clear timeline for the handover and has framed the move as part of a structured succession plan.

Jayant Dua will be referred to as MD after assuming the role and will be responsible for overseeing operations, strategy and growth initiatives across the company’s network. The company said the designation follows established governance norms and aims to ensure continuity in executive leadership. The appointment is expected to allow a phased transfer of responsibilities ahead of the formal changeover.

The decision is intended to provide strategic stability as UltraTech Cement navigates domestic infrastructure demand and evolving market dynamics. Management will continue to focus on operational efficiency, capacity utilisation and cost management while aligning investments with long term objectives. The board will monitor the transition and provide further information on leadership responsibilities closer to the effective date.

Investors and market observers will have time to assess the implications of the announcement before the change is effected, and analysts will review the company’s outlook in the context of the succession. The company indicated that it will communicate any additional executive appointments or organisational changes as they are finalised. Shareholders were advised to refer to formal filings and company releases for definitive details on governance or remuneration.

The leadership change will be managed with attention to stakeholder interests and operational continuity, and the company reiterated its commitment to delivery on ongoing projects and customer obligations. Senior management will engage with employees and partners to ensure a smooth handover while maintaining focus on safety and compliance. Further updates will be provided through official investor communications in due course.

Continue Reading

Concrete

Merlin Prime Spaces Acquires 13,185 Sq M Land Parcel In Pune

Rs 273 crore purchase broadens the developer’s Pune presence

Published

on

By

Shares

Merlin Prime Spaces (MPS) has acquired a 13,185 sq m land parcel in Pune for Rs 273 crore, marking a notable expansion of its footprint in the city.

The transaction value converts to Rs 2,730 mn or Rs 2.73 bn.

The parcel is located in a strategic area of Pune and the firm described the acquisition as aligned with its growth objectives.

The deal follows recent activity in the region and will be watched by investors and developers.

MPS said the acquisition will support its planned development pipeline and enable delivery of commercial and residential space to meet local demand.

The company expects the site to provide flexibility in product design and phased development to respond to market conditions.

The move reflects an emphasis on land ownership in key suburban markets.

The emphasis on land acquisition reflects a strategy to secure inventory ahead of demand cycles.

The purchase follows a period of sustained investor interest in Pune real estate, driven by expanding office ecosystems and residential demand from professionals.

MPS will integrate the new holding into its existing portfolio and plans to engage with local authorities and stakeholders to progress approvals and infrastructure readiness.

No financial partners were disclosed in the announcement.

The firm indicated that timelines will depend on approvals and prevailing market conditions.

Analysts note that strategic land acquisitions at scale can help developers manage costs and timelines while preserving optionality for future projects.

MPS will now hold an enlarged land bank in the region as it pursues growth, and the acquisition underlines continued corporate appetite for measured expansion in second tier cities.

The company intends to move forward with detailed planning in the coming months.

Stakeholders will assess how the site is positioned relative to existing infrastructure and connectivity.

Continue Reading

Concrete

Adani Cement and Naredco Partner to Promote Sustainable Construction

Collaboration to focus on skills, technology and greener practices

Published

on

By

Shares

Adani Cement has entered a strategic partnership with the National Real Estate Development Council (Naredco) to support India’s construction needs with a focus on sustainability, workforce capability and modern building technologies. The collaboration brings together Adani Cement’s building materials portfolio, research and development strengths and technical expertise with Naredco’s nationwide network of more than 15,000 member organisations. The agreement aims to address evolving demand across housing, commercial and infrastructure sectors.

Under the partnership, the organisations will roll out skill development and certification programmes for masons, contractors and site supervisors, with training to emphasise contemporary construction techniques, safety practices and quality standards. The programmes are intended to improve project execution and on-site efficiency and to raise labour productivity through standardised competencies. Emphasis will be placed on practical training and certification pathways that can be scaled across regions.

The alliance will function as a platform for knowledge sharing and technology exchange, facilitating access to advanced concrete solutions, innovative construction practices and modern materials. The effort is intended to enhance structural durability, execution quality and environmental responsibility across developments while promoting adoption of low-carbon technologies and green cement alternatives. Companies expect these measures to contribute to longer term resilience of built assets.

Senior executives conveyed that the partnership reflects a shared commitment to strengthening quality and sustainability in construction and that closer engagement with developers will help integrate advanced materials and technical support throughout the project lifecycle. Leadership noted the need for responsible construction practices as urbanisation accelerates and indicated that the association should encourage wider adoption of green building norms and collaboration within the real estate and construction ecosystem.

The organisations said they will also explore integrated building solutions, including ready-mix concrete offerings, while supporting initiatives aligned with affordable and inclusive housing. The partnership will progress through engagements, conferences and joint training programmes targeting rapidly urbanising cities and growth centres where demand for efficient and environmentally responsible construction grows. Naredco, established under the aegis of the Ministry of Housing and Urban Affairs, will leverage its policy and advocacy role to support implementation.

Continue Reading

Trending News

SUBSCRIBE TO THE NEWSLETTER

 

Don't miss out on valuable insights and opportunities to connect with like minded professionals.

 


    This will close in 0 seconds