Anuj Kumar Mathur, Industry Expert and Retd. DGM – Safety, Health & Environment, Indian Oil Corporation, talks about the Personal Protective Equipment (PPE) and its various applications in Cement Industries.
Personal Protective Equipment (PPE) refers to specialised clothing or equipment worn by workers to protect themselves from health and safety hazards in the workplace. In fact, PPE acts as a barrier between the worker and potential risks, such as physical injuries, chemical exposures or respiratory hazards.
PPE serves as the last line of defence against occupational hazards in any industry. While engineering controls and administrative measures are essential, the proper selection, use, and maintenance of PPE can significantly reduce the risk of injury and illness.
Key purposes of PPE are:
- Prevent injuries from accidents (e.g., falling objects, cuts, burns)
- Protect against harmful substances (e.g., dust, fumes, chemicals)
- Reduce the risk of long-term health issues (e.g., hearing loss, respiratory diseases)
The process of cement industry
The process starts with the extraction of raw materials such as limestone, clay, and other additives like iron ore and bauxite from quarries. These materials are then crushed into smaller sizes for easier processing. The crushed raw materials are ground into a fine powder in mills and are proportioned carefully. This mixture is called raw meal. Accurate blending ensures the quality of the final product. The raw meal is fed into a preheater tower and then into a rotary kiln. Here, it is subjected to very high temperatures (around 1450°C). This process causes the raw meal to undergo calcination, forming clinker, the intermediate product of cement. The hot clinker coming out of the kiln is rapidly cooled using air. This sudden cooling helps maintain the desired properties of the clinker. The cooled clinker is mixed with gypsum and other materials and ground into a fine powder in a cement mill. This fine powder is cement. The final product is stored in silos and then packed in bags or transported in bulk to distributors and construction sites.
Occupational hazards in cement industry
The cement manufacturing process involves exposure to a wide range of occupational hazards including dust, noise, high temperatures, mechanical injuries and chemical exposure. The use of appropriate PPE is essential for safeguarding workers’ health and safety at every stage.
Let’s look at the various PPEs and their application areas in cement manufacturing process:
Head protection: To protect against falling objects, head injuries from overhead equipment and impacts during maintenance work.
PPE used: Industrial safety helmets (hard hats) with chin straps.
Application areas:
- Quarrying and raw material handling (risk of falling rocks/debris)
- Maintenance activities in high or elevated areas
- Construction and structural work around kilns and mills
Eye and face protection: To guard against dust, flying particles, chemical splashes and radiant heat.
PPE used: Safety goggles (for dust and chemical protection) and face shields (for grinding, welding or high-temperature zones).
Application areas:
- Crushing and grinding units (dust and particles)
- Clinker cooling (heat and dust)
- Chemical handling and cement packaging areas
Respiratory protection: To prevent inhalation of dust, silica particles and harmful gases, which can cause respiratory illnesses such as silicosis or chronic obstructive pulmonary disease (COPD).
PPE used: N95/N99 dust masks (for short-term, low-dust exposure), half- or full-face respirators with particulate filters (for high dust or gas exposure), and self-contained breathing apparatus (SCBA) for confined spaces or toxic environments.
Application areas:
- Raw material grinding, clinker grinding
- Kiln operations and maintenance (exposure to hot gases)
- Cement bagging and despatch zones
- Cleaning of silos or confined spaces
Hearing protection: To prevent hearing loss from prolonged exposure to high noise levels generated by crushers, mills and rotary kilns.
PPE used: Earplugs (disposable or reusable) and earmuffs (for high-noise environments).
Application areas:
- Ball mills, crushers, fans and compressors
- Packing and despatch sections
- Any location where noise exceeds 85 dB(A)
Hand protection: To protect against mechanical injuries, chemical exposure and thermal burns.
PPE used: Cut-resistant gloves (handling sharp tools or materials), chemical-resistant gloves handling additives, fuels, lubricants) and heat-resistant gloves (working near kilns or clinker).
Application areas:
- Maintenance and repair
- Chemical dosing and laboratory work
- Handling hot surfaces near kilns or clinker coolers
Foot protection: To prevent injuries from heavy objects, sharp materials, slips and chemical spills.
PPE used: Steel-toed safety boots with slip-resistant soles, rubber boots (for chemical or wet areas) and heat-resistant footwear (for kiln areas).
Application areas:
- Quarry and crushing areas
- Grinding, kiln and cooler zones
- Cement packaging and warehouse
Body protection: To shield against chemical splashes, radiant heat, dust exposure and sharp edges.
PPE used: Coveralls or long-sleeved flame-retardant clothing, high-visibility vests for mobile equipment zones and chemical-resistant aprons (in labs or dosing areas).
Application areas:
- Entire plant, especially dusty or hot zones
- Maintenance tasks, welding and hot work
- Quality control labs and chemical dosing
Fall protection: To prevent falls from heights during inspection, cleaning or maintenance.
PPE used: Full-body safety harness with lanyards, lifelines and fall arrest systems
Application areas:
- Kiln maintenance, silo inspection and conveyor systems
- Working on platforms, ladders or scaffoldings
Regular training for use of PPEs and audits
for use of PPEs should be conducted to ensure compliance and worker safety across all stages of cement production.
New-age safety monitoring tools
AI-enabled tools are transforming safety protocols in industries by turning passive protection into active prevention. These smart systems use AI-powered cameras and sensors to monitor workers in real time, instantly detecting missing gear, improper usage or unsafe proximity to hazardous zones.
Unlike traditional use of PPE, which relies solely on human compliance, AI-enhanced equipment adds an intelligent layer of oversight—alerting supervisors and workers the moment a potential risk is identified. This fosters a culture of continuous awareness. As the industry embraces digital transformation, AI-enabled safety monitoring gadgets are emerging as a crucial tools in the mission toward Zero Loss, blending technology with accountability to keep every shift safer.
PPE Matrix: PPE and its application areas
PPE Item Purpose / Protection Typical Application Areas in Cement Industry
Hard Hat (Safety Helmet) Head protection from falling debris and impacts Quarries, crushing units, conveyor systems, maintenance zones near mills and kilns
Safety Goggles / Glasses Eye protection from dust, particles, chemical splash Raw material handling, grinding areas, packaging, chemical dosing
Respirators / Dust Masks Protection from cement dust and silica exposure Grinding, clinker handling, kiln areas, silos, packing zones
Ear Protection (Earplugs/Earmuffs) Hearing conservation from loud machinery noise Crushers, ball mills, fans, conveyors
Gloves (Cut resistant / Chemical / Heat resistant) Protect against mechanical injury, chemical burns, heat Raw handling, maintenance, chemical dosing, kiln and cooler zones
Safety Boots (Steel toe, Slip resistant) Foot protection against falling objects, slips, chemical contact Quarry areas, material handling, storage, dispatch docks
High Visibility Clothing Ensures visibility around moving vehicles and machinery Logistics, dispatch zones, mobile equipment areas
Coveralls / Full Body Protection Protect against dust, cement burns, static discharge Clinker grinding, dust intensive zones, chemical labs, kiln maintenance
About the author:
Anuj Kumar Mathur is a result-driven professional with 36+ years of experience in the petroleum industry across India and Kuwait. He has successfully led fire and safety departments in two Indianoil refineries, demonstrating strong teamwork and managerial skills. He is well-versed in safety inspections, accident investigations and safety audits.