Benefits of using ternary blend-cement, flyash and GGBFS.
Cement is the prime ingredient in concrete. One tonne of cement produces around 0.8 to 1 MT of carbon dioxide. It’s worth noting that efforts are being made to reduce the carbon footprint of cement production by using supplementary cementitious materials such as flyash and GGBS in concrete. In case of ternary blended concrete, supplementary cementitious materials flyash, GGBS are used in addition to cement, sand, aggregate, water and admixture.
To evaluate the percentage of replacement of cement with flyash and GGBS, one needs to understand the properties of concrete mixed with flyash, GGBS as ingredient, structure strength, stripping time, durability requirements.
Flyash: Pulverised coal is used in thermal power plants for electricity generation. A by-product of this combustion reaction is flyash. The electrostatic precipitators (ESPs) used inside chimneys of the power plants remove flyash before ejecting out the combustion gases into the atmosphere. Flyash is a very fine particle like residue, which has pozzolanic properties. Hence, it is often blended with cement and also used as partial replacement of cement.
Flyash consists of silica (SiO2), alumina (Al2O3) and calcium oxide (CaO) as its major components.
- Due to the spherical shape of flyash, water demands in concrete are reduced and concrete becomes more cohesive.
- Silica in flyash reacts with calcium hydroxide released from cement to form CSH Gel.
- Formation of CSH Gel leads to increase in strength of concrete further and makes the concrete dense and durable.
- 35 per cent of cement can be replaced with flyash according to IS specification.
- Early strength is observed to be less for flyash concrete. Due to slow development of strength of concrete, stripping time gets delayed.
Ground granulated blast furnace slag (GGBFS): Blast furnace slag is a by-product of iron ore during the iron extraction process. Amongst all mineral admixtures, blast furnace slag has the highest specific gravity (2.8 to 3.0). The slag fineness is slightly more than that of the cement.
There are various types of slag available like air cooled slag, expanded or foamed slag, granulated slag. GGBFS possesses both cementitious and pozzolanic properties. An activator is needed to hydrate the slag.
- GGBFS increases the initial setting time of the concrete. But it does not alter the workability of the concrete much because its fineness is almost the same as that of the cement.
- The early rate of strength gain in concrete is diminished by replacement of cement in the concrete with GGBFS.
- The final strength is improved by slag cement and the durability of the concrete is increased.
- Concrete uses in marine construction are highly prone to chemical attack and corrosion. GGBFS as a concrete ingredient increases resistance against sulphate and chloride attack.
- Normally concrete tends to segregate with GGBS as an ingredient.
Ternary blend: Ternary blended concrete is observed to be more cohesive and workable due to presence of flyash in concrete. Early strength gain can be achieved by using both cement and GGBS in concrete. Concrete with ternary blend is a win-win situation in terms of good product quality, optimising the cost of concrete, durability and resistance against chemical attack. Additionally, the use of SCMs in concrete can contribute to sustainability efforts by minimising the cement content which is associated with significant carbon dioxide emission during its manufacturing process. The hydration process of ternary blended concrete is divided into primary reaction by OPC and GGBS, pozzolanic reaction of GGBS and flyash as the secondary process. Both materials react with Calcium hydroxide produced by cement hydration to form CSH gel which gives denser microstructure than conventional OPC concrete. The dense structure improves the durability properties of ternary blended concrete. Process yields to minimise penetration of aggressive chemicals such as sulphate, chloride as compared to conventional concrete mix.
– Nagesh Veeturi and Sumanta Sahu
(Communication by the management of the company)