The drive unit and the gripping arm are driven automatically by servomotors, ensuring precise positioning and energy efficiency. The gripping system and the application unit attach the bag from the bag ream safely onto the filling spout. The drive technology used in combination with the electric coupling of both servo drives of the gripping arm and the application unit minimises the number of necessary mechanical components. The sophisticated kinematics also reduce the vibration of the machine, increasing its service life significantly. An oil-free vacuum ejector ensures low-maintenance operation. Additionally, since the gripping arm is supported on both sides, it keeps running very smoothly even at an output rate of 6,000 bags per hour.
The operator can use this version for PP, PE and paper valve bottom bags. Bag length of 350 to 650 millimetre and bag width of 230 and 550 millimetre is possible as well as valve width of 80 to 160 millimetre. The new system can handle 3,000 bags per hour and the high-capacity version can handle up to 6,000 bags.
The optional turntable is driven pneumatically with a swivelling range of up to 60 degree or electrically with a range of up to 150 degree.
The modular design of the ream magazine can be adjusted to lengths from two to nine metre.
The drive and end stop can be installed on either side. The ream magazine can be filled ergonomically even with varying heights of the filling spouts.