The Track Stone Jaw Crusher, manufactured by DSMAC Group, China is mounted directly onto chassis on 4 pins, which is fully driven by hydraulic force and moves by chassis track. This has the added benefit of eliminating stress on the chassis. The crusher is welded in low stress areas, thus giving longer life. The feeder is equipped with a grizzly section located at the discharge end for removal of fines. This feature allows the passage of fine material direct to the discharge conveyors, so that it does not pass through the jaw crusher feed opening. This design makes possible a high production capacity by avoiding the accumulation of fine material (sometimes mud or clay) at the bottom end of the crushing chamber. The layer of fine material separated by the grizzly feeder is fed on to the main conveyor belt before the drop point from the jaw crusher and reduces the impact from the larger stones on the belt, beneath the jaw crusher. The fine material and the crushed product are transported on the main conveyor. As an option, a separate natural fines belt conveyor can take out the natural fines. This tracked jaw crusher (also called crawler jaw crusher or portable crawler crusher) is designed for high performance in today’s demanding crushing environments. During the crushing operation this unit generates enough power to drive additional components such as screen plants or conveyors leading to a complete self contained crushing and screening operation without the need for external generators. This machine is electrically driven for maximum efficiently in large quarry applications. This series Track Stone Jaw Crusher is used as a crushing equipment for stone and construction waste, which is explored and developed by the company. It expands the conception of primary and secondary crushing operation. To meet the customer’s requirements is the aim of this design.