The Blastcrete model MX-20CM mixer pump specially for refractory placement will be used for both small refractory installations of 2-3 tonne per hour as well as high volume installations of up to 25 tonne per hour. The machine features a compact two-stage high-shear primary continuous mixer where the material is hydrated, and a medium shear secondary mixer that is mounted in the receiving hopper of the four inch high pressure swing tube pump. With the discharge pressure of the four inch pump, the hydraulic pressure to operate the pump is much lower because of oversized differential cylinders. The popular and proven swing out receiving hopper is also a feature of the pump making it much easier to clean and service. Dust generated in charging the continuous mixer is all but eliminated, and the clean up of the continuous mixer is much quicker and generates very little waste. The efficiency of the two stage mixer and pump with oversized differential allow for the machine to require only 100 HP which lowers fuel consumption by 50 per cent when compared to competitive machines. The towing weight of the machine is 7,500 pounds. It is available with 4"x36" swing tube piston pump with 2200 PSI piston faces pressure for rugged refractory pump cast and shotcrete applications, high shear continuous mixer with 25 tonne per hour output, simple swing out receiving hopper for easy access to the swing tube section for cleaning and maintenance; forklift tubing mounted to lower hopper for easy flat pack removal; 0-20 gallon flow meter; solid state electronic controls; and overhead crane pick up.Contact:Blastcrete Equipment companyTel: +1-256-235 2700; +1-800-235 4867.Fax: +1-256-236 9824Email: scott@blastcrete.comWebsite: www.blastcrete.com